Flying Industry Development 4S1PFC-AC220+CV-8-3 Quick Manual

RF Wireless Remote Control Kit (Model 0020211 4S 1PFC-AC220+ CV-8-3)
The receiver is designed for one-transm itter-many-receivers system . Y ou can use a 4 buttons transmitter to control 2 receivers, or use a 6
buttons transm itter to control 3 receivers, or use a 8 buttons transmitter to control 4 receivers, or use a 12 buttons transmitter to control 6
receivers.
Package Include:
4 X Receiver: S1PFC-AC220
1 X Transmitter: CV-8-3
1 X Use manual
Features:
Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and
equipments w ith AC motors, it can remote control AC motor rotates in the positive or reversal direction.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
You can rotate a motor in the positive or reversal direction w i t h the transmitter (remote control) from any place within a reliable distance.
The RF w ireless signal can pass through walls, floors and doors.
High Pow er: Each channel can work at maximum current 30A.
With limit control terminals: You can connect limit sw itches or sensors to stop the motor.
With w ired control terminals: You can connect manual sw itches or external devices (w ith low level output signal, such as sensors) to control the
motor.
Design w ith low -power and high-speed CMOS technology.
You can turn on/ off the receiver w ith transmitter (remote control) from any place within a reliable distance.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter w hi c h use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No: S1PFC-AC220
Control Mode: Latched or Momentary
Coding Type: Fixed code or learning code
Coding Setting: By learning
Pow er Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Working Frequency: 315MHz / 433MHz
Channel: 1 CH, can w ork w ith 1 AC motor
Static Current: ≤6mA
Maximum Working Current: 30A / each channel, so motor' s maximum starting current can not exceed 30A.
PCB Size: 140mm x 73mm x 18mm
Case Size: 192mm x 100mm x 45mm
Transmitter:
Model No.: CV-8-3
Shell Color: White
Channel/Button: 8
Button Symbol: Four▲, Four▼,
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 15mA
Encoding Chip: PT2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 500m / 1500ft (theoreti c ally)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 110mm x 50mm x 18mm
Working Range:
With a transmitter (such as CV-8-3) to form a complete set, the working distance can reach 500M in an open ground. The maximum w orking distance
500M is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it w ill be hindered by trees,
walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may or may not reach 500M.
Usage (with transmitter CV-8-3):
Connect live w i r e to terminal "L" and neutral w i r e to terminal "N". Then connect AC motor to terminals "UP", "COM" and "DOWN". You can exchange
"UP" and "DOWN" w ires of motor to change the rotating direction of motor.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com