Table of Contents
Advertisement
of the unit when installing the fixture.
The equipment must be fixed by professionals at a place where is out of the reach of people and where nobody can pass
by or under it.
5. How To Control The Unit
There are three ways to operate the unit:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
A. Master/Slave operation
In master/slave mode you can link as many units together in a days-chain to perform the built-in pre-programmed
lighting shows triggered by music.
For Master/Slave mode please refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
LED display as below:
DMX code setting: d001~d512 (5 channels)
CH1
0~255
0~100
CH2
101~255
CH3
0~255
11~200
CH4
201~255
CH5
0~255
DMX code setting: H001~H512 (6Channels)
CH1
CH2
CH3
CH4
CH5
CH6
©Copyright LOTRONIC 2013
LED mode 1
LED mode 2
Flash Speed
Flash
Auto DMX
Sound DMX
Auto DMX/ Sound DMX Speed (Slow--Fast)
0~255
WAY-1 LED
0~255
WAY-2 LED
0~255
WAY-3 LED
0~255
WAY-4 LED
0~255
WAY-5 LED
0~255
WAY-6 LED
3
Advertisement
Table of Contents
