Advertisement
3.
INSTRUCTIONS
3.1.
Charging the shaver
3.1.1. If shaver is not charged, plug the charger into a suitable electrical socket and plug the 2 pin socket into
the shaver. Turn power on at the mains socket switch and the charging indicator on the shaver will light.
Charge for 2 hours (the shaver can be left connected for up to five hours, but do not exceed this as
battery life will be shortened). For optimal battery life, the shaver should be left for 2 hours after fully
charging, before being used. The battery should be fully discharged before re-charging.
Note! The charging light indicates connection to mains power only, it does not go out when fully charged.
Do not overcharge as this may damage the battery and invalidate your warranty.
3.2.
Using the shaver
3.2.1. Remove the cutter cover and turn shaver on by sliding On/Off switch upwards (Fig.1).
3.2.2. Hold the shaver at 90° to the skin and gently touch the skin with the shaver head.
3.2.3. Move the shaver in the opposite direction to hair growth for best results.
3.2.4. To ensure the closest shave, stretch the skin tightly with hand.
3.2.5. Shaver can also be used in conjunction with shaving foam or cream. Ensure shaver head is constantly
rinsed in clean water during shaving to keep cutting head clean.
3.2.6. To use trimmer, push trimming attachment fully upwards (Fig.2) and hold cutting head at right angles to
skin before touching the skin with the cutter head. Trim as necessary.
Fig.1
4.
CARE OF SHAVER
Always disconnect the shaver from the charger before carrying out any cleaning or maintenance.
4.1.
Cleaning the shaver
4.1.1. Pinch the two head unit release buttons inwards and remove the head unit (Fig.3).
4.1.2. Carefully brush away any hair, debris etc. from the cutting heads, the foil covers and the body of the
shaver (Figs.4 and 5).
4.1.3. Clean around the cutting blades of the trimmer.
4.1.4. The shaver can also be cleaned and rinsed with water (Fig.6).
4.2.
Maintenance
4.2.1. To change the foil, remove the head unit by pinching the two head unit release buttons inwards and then
lifting away (Fig.3).
4.2.2. Using a small screwdriver or similar, carefully prise away the foil from the head unit, starting at one end.
4.2.3. To insert the new foil, carefully bend it backwards and gently push it into the clip holders in the head unit.
Do not use excessive force.
4.2.4. Replace the head unit on the shaver.
Fig.3
Fig.5
Environmental Protection.
5.
Declaration of Conformity We, the sole importer into the UK, declare that the product listed here is in
conformity with the following standards and directives.
The construction file for this product is held by the manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
Rechargeable Wet/Dry Shaver/Trimmer
Fig.2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and
address, including postcode.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Rechargeable battery is recyclable. Take to your local recycling centre to be disposed of properly.
Do not incinerate battery as it may explode when exposed to fire. Do not attempt to open battery pack.
DECLARATION OF CONFORMITY
2hr Fast Charge
Model No: SRS07
79/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
2002/95/EC RoHS Directive
2002/96/EC WEEE Directive
For Jack Sealey Ltd. Sole importer into the UK of
93/68/EEC CE Marking Directive
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Fig.4
Fig.6
Signed by Mark Sweetman
20th March 2007
Sealey Power Products.
01284 757500
www.sealey.co.uk
Web
01284 703534
sales@sealey.co.uk
email
Advertisement
