Technical Features; First Installation - Faber Slot Plast User Manua

SLOT
VERSION PLAST E INOX
Elegant and compact designed coffee pods
machine, with sober and equilibrated proportion,
perfect either for home or office.

TECHNICAL FEATURES

Aluminum heat exchanger with brass torpedo
water system
Brass pods press
Limited thermostat 95°/98°
Tank capacity PET 1,4 L
Alimentation 220v-50hz
Pomp 16 Bars
SIZES
Larghezza 21 cm | Profondità 32 cm
Altezza 35 cm | Peso 5 Kg circa

FIRST INSTALLATION

Remove the packaging and make sure that the
machine it's intact, on the contrary, contact as
soon as possible your seller without use the
machine. All elements of packaging represent
a dangerous source for children and disable
persons. The electrical system must be equipped
of grounding, Faber Italia Srl cannot be responsible
for any damages caused by lack of grounding
electrical system. Please do verify that technical
features of the device, are suitable with those of
your electrical system. Do not use not conformed
extension cables or adapters.
(1) ON/OFF switch (2) Temperature light switch (3) Coffee erogation
switch (4) Closing pod lodge lever (5) Pod lodge (6) Water tank (7) Tank
slot cover (8) Brewing spout
INSTRUCTIONS
1.
Lift up the tank slot cover (7) and extract the
tank.
2. Fill the tank of not sparkling water.
3.
Put the tank back to its lodge making sure that
4.
the silicon calble goes inside the tank.
5.
Plug in the alimentation cable.
Switch the machine on (1) - light on.
6. Wait for the warning temperature light (2)
switches off.
Place the pods on its lodge (5) and lift down the
7.
lever (4) pushing down until hearing a locking
click.
07
USER MANUAL