Table of Contents
Advertisement
Getting started
Attaching the microfibre cleaning pad
For use on sealed hard floors or refreshing carpets.
WARNING: To reduce the risk of personal injury, unplug the steamer when fitting the cleaning pads.
IMPORTANT: Never use the steam cleaner without a cleaning pad attached to the floor head.
Filling clean water tank
To remove lid, rotate
anti-clockwise.
IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not over fill the water tank.
IMPORTANT: Do not operate your steam cleaner without water in the clean water tank.
Place the floor head on top of the microfibre pad making
sure the mop head covers the entire pad.
The blue face should be in contact with the floor and white
side attaches to the floor head.
Using the measuring jug and
funnel, only fill up to 1.4L. Allow
space to be left at the top.
Ensure the lid is securely
fastened by rotating clockwise
before use.
Advertisement
Table of Contents
