Advertisement
Table of Contents
CLEANSSETTE Manual
Screw
Cover
Latch
Guide roller
Cassette reel
Cover guide roller
How to use
Structure
1. Open the shutter by gripping lever.
New cleaning tape will appear.
2. Push and slide a ferrule end face while
gripping the lever. While sliding the
ferrule end face, please make sure the
ferrule end face has completely touch
the cleaning tape. After slide the ferrule
end face in one slot, turn the ferrule
end face 90 degree and slide the
second slot.
3. Close the shutter by releasing the grip.
4. You may view the remaining reel from
the window.
Optical Connector Cleaner
Window
Wiping Board
Guide Roller
Latch
Lever
The angle mark
for cover guide roller
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Hobbes CLEANSSETTE
- Page 1 CLEANSSETTE Manual Optical Connector Cleaner Structure Window Screw Wiping Board Cover Guide Roller Latch Guide roller Latch Cassette reel Lever Cover guide roller The angle mark for cover guide roller How to use 1. Open the shutter by gripping lever.
- Page 2 Be Careful not to place this product at more than 60°C for long times and it may loose its functionality. Replace the new reel in the manual way. If you do not, a damage may result. CLEANSSETTE can not be warranted when improper replacement is installed.
Need help?
Do you have a question about the CLEANSSETTE and is the answer not in the manual?
Questions and answers