InstallatIon · Manual
4.0281
Retrofit-Schwimmbad-Scheinwerfer aus V4A-Edelstahl
Retrofit-Swimmingpool-Light made V4A-stainless steel 316L
Projecteur de Piscine – Version adaptable, en acier inoxydable V4A
1. anwendung
„Retrofit"- Unterwasser-Scheinwerfer zum nachträglichen Umrüsten
bei bestehendem Beleuchtungsanlagen und montiertem Einbauge-
häuse (WIBRE Serie 4.0268/4.0274)
Der Scheinwerfer ist für einen Einsatz bis 5,0 m Wassertiefe geeignet. Die
Konstruktion ist komplett aus V4A-Edelstahl 1.4571 gefertigt und
zusätzlich epoliert. Die Verwendung des Scheinwerfers in Süßwasser,
chloriertem Schwimmbadwasser und in Meerwasser ist möglich.
Die Umrüstung bei bereits installierten Einbaugehäuse eines Fremd-
fabrikats ist möglich, dabei jeweilges Manual des Einbaugehäuses
beachten und ggf. zur Montage eine Adapterplatte verwenden oder
nach Absprache.
Scheinwerfer ist vor Einfrieren zu schützen, das Wasser muss frei von
Metall angreifenden Bestandteilen sein.
Vorhandenes Einbaugehäuse ist zur Installation erforderlich
Zubehörteile (z.B. Betriebsgeräte) sind optional lieferbar.
achtung! Betrieb nur Unterwasser.
Von jeglichen Kabelverbindungen im Einbaugehäuse bzw. im
Kabelrohr wird abgeraten.
Für die gesamte lichttechnische Anlage wird eine Überspannungs-
schutzeinheit und die Verwendung eines Trenntrafos zur sicheren
elektrischen Trennung (Schutztrennung) empfohlen.
Sonderkonstruktionen-/anwendungen auf Anfrage.
2. technische Daten/Konstruktion
· Scheinwerfer komplett aus V4A-Edelstahl 1.4571 EPOL
· Schutzart IP68 – Wassertiefe 5m
· Runde Aufsatzblende aus V4A-Edelstahl (Höhe 13 mm, ø 258 mm)
· mit 24 POW-LED (total 62 W), 12 V-DC
· mit 24 POW-LED (total 35 W), 12 V-DC
· kaltweiss (6.000K), neutralweiss (4.500K), warmweiss (3.000K), royalblau
· mit 15 Multichip POW-LED RGB (all on 115 W), 12 V-DC
· mit 12 Multichip POW-LED RGB-W (all on 110 W), 12 V-DC
· POW LED Platine temperaturüberwacht (onboard)
· speziell für Schwimmbadausleuchtung angepasste
Lichtverteilung „Multiflux"
· Lieferung ohne Kabel
· Konstantstromnetzteil oder RGB Controler separat bestellen
· Einbaugehäuse vorhanden (z.B. WIBRE Serie 4.0268/4.0274)
WIBRE Elektrogeräte Edmund Breuninger GmbH & Co. KG · Liebigstrasse 9 · 74211 Leingarten/Germany
Telefon: +49 (0) 7131 9053-0 · Telefax: +49 (0) 7131 9053-19 · E-Mail: info@wibre.de
140
258
169
140
258
169
1. application
„Retrofit"- underwater spotlight for retrofit modification of existing
lighting systems and mounted installation housing (WIBRE series
4.0268/4.0274)
The spotlight is suitable for use in water up to 5.0 m deep. It is made
entirely of V4A stainless steel 1.4571 and is also electropolished. The
spotlight can be used in fresh water, chlorinated swimming pool water
and in salt water.
Retrofitting is possible even with an already installed installation housing
from another manufacturer, but follow the manual of the installation
housing and use an adapter plate, if necessary, or in consultation.
The spotlight must be protected from freezing, and the water must be free
of metal-corroding components.
An existing installation housing is required for installation.
Accessories (e.g. operating devices) can be supplied optionally.
attention! Operation only underwater.
Cable connections in the installation housing or conduit are not recom-
mended.
A surge protection unit and use of an isolating transformer for secure
electrical disconnection (protective separation) are recommended for the
entire technical lighting system.
Special designs/applications on request.
2. technical Details/Construction
· Spotlight, entirely made of V4A stainless steel 1.4571 EPOL
· Protection class IP68 – Water depth 5 m
· Round attachment cover, V4A stainless steel, (Height 13 mm, ø2 58 mm)
· with 24 POW-LED (total 62 W), 12 V-DC
· with 24 POW-LED (total 35 W), 12 V-DC
· coldwhite (6.000 K), neutralwhite (4.500 K), warmwhite (3.000 K), royalblue
· with 15 Multichip POW-LED RGB (all on 115 W), 12 V-DC
· with 12 Multichip POW-LED RGB-W (all on 110 W), 12 V-DC
· POW-LED-Platine temperature control (onboard)
· light distribution especially for swimming pool lighting „Multiflux"
· Supplied without cable
· Constant-current power source/RGB controller ordered separately
· installation housing available (e.g. WIBRE series 4.0268/4.0274)
66
53
166
53
13
166
13
1. application
Projecteurs immergeables « Retrofit » de complément pour installations
d' é clairage existantes et boîtier d' e ncastrement monté (WIBRE série
4.0268/4.0274)
Le projecteur convient pour une installation jusqu'à une profondeur de
5 m. Construction entièrement réalisée en acier inoxydable électropoli V4A
1.4571. Le projecteur peut être utilisé dans l'' e au douce, l' e au de piscine
chlorée et dans l' e au de mer.
Le rajout d'un produit d' o rigine extérieure dans un boîtier d' e ncastrement déjà
installé est possible, sachant alors qu'il faut respecter le manuel concerné du
boîtier d' e ncastrement et utiliser éventuellement une plaque d'adaptation
ou nous consulter.
Protéger le projecteur contre le gel, l' e au doit être exempte d' é léments
agressifs contre les métaux.
Le boîtier de montage existant est indispensable pour l'installation.
Les accessoires (p. ex. blocs d'alimentation) sont disponibles en option.
attention! Fonctionnement immergé uniquement.
Les raccords de câbles dans le boîtier d' e ncastrement ou dans la gaine de
câbles sont déconseillés.
Une unité anti-surtension et l'utilisation d'un transformateur sectionneur
permettant un sectionnement électrique sûr (sectionnement de protection)
sont recommandées pour l' e nsemble de l'installation d' é clairage technique.
Constructions/applications spéciales sur demande.
2. Caractéristiques techniques/Construction
· Projecteur complet en acier inoxydable électropoli V4A 1.4571
· Indice de protection IP68 – Profondeur d'immersion jusqu'à 5m
· enjoliveur rond en acier inoxydable V4A (H13 mm, ø258mm)
· avec 24 POW-LED (total 62 W), 12 V-DC
· avec 24 POW-LED (total 35 W), 12 V-DC
· blanc froid (6.000 K), blanc neutre (4.500 K), blanc chaud (3.000 K), bleu royal
· avec 15 Multichip POW-LED RGB (all on 115 W), 12 V-DC
· avec 12 Multichip POW-LED RGB-B (all on 110 W), 12 V-DC
· platine POW-LED à température contrôlée (onboard)
· Diffusion de lumière adaptée spécialement à l' é clairage des piscines (Multiflux)
· Livré sans câbles
· Bloc d'alimentation en courant continu ou contrôleur RVB
commander séparément
· Boîtier de montage existant (par exemple WIBRE série 4.0268/4.0274)
V4A
IP68
EPOL
5
M
EDELSTAHL
KABEL
NTC
12
V
238
EXCL
CONTROL
INKL
2
166
238
2
66
140
166
169
140
238
169
238
1/6
Need help?
Do you have a question about the Retrofit and is the answer not in the manual?
Questions and answers