Operating - Medisana WBM Instruction Manual

88362_WBM_Fußsprudelbad_West.qxd:WBM

3 Operating

3.1
Footbath
and massage
with water
3.2
Foot massage
without water
3.3
Filling with water
21.08.2009
2 Useful Information / 3 Operating
Infraredradiation
In positions 1 and 3, the infrared radiation
soles of your feet, producing a pleasantly warm sensation.
Heattreatment
Das MEDISANA WBM foot spray bath heats the water in the device to a
pleasant temperature and ensures that the temperature remains constant during
use.
Aromatherapy
A depression is embedded in the MEDISANA WBM footbath for the addi-
tion of aromatic substances and bath salts.
The added substances mix slowly with the water and intensify the relaxing effect
of the footbath.
Before filling the device with water, make sure that no mains leads are con-
nected, i.e. the electricity lead must not be plugged-in!
When the foot spray bath is securely placed on the floor (ensuring that it
cannot tip over), and has been filled with water, insert the mains plug into the
power supply socket.
Generally speaking you can take about 10 to 15 minutes for a footbath with a
massage, once or twice daily. However you should ensure that the device has
completely cooled off before it is used again!
You can also use the device for a foot massage without water - for this mode
switch the Rotary switch
radiation).
The MEDISANA WBM foot spray bath can be filled with up to 3.3 litres of
water. The maximum filling height is marked
can use cold or warm water with or without bath additives, just as desired.
CAUTION
Make sure that you use your MEDISANA foot spray bath
on a safe and even surface that is not sensitive to moisture.
Never use any foaming bath additives or bath salts.
13:27 Uhr Seite 11
is activated and penetrates the
to position 1 (vibrationmassage with infrared
in the foot spray bath. You
GB
11