Berkeley Varitronics Systems PTC-HOUND Quick Start User Manual page 2

SCANNING 4 FREQUENCIES
If your scan list contains
SCANNING 30 FREQUENCIES
4 or less frequencies,
If your scan list contains 5 or
you can view up to four
more frequencies, you can
custom RF frequencies
view up to 30- custom RF
simultaneously and set
frequencies simultaneously
markers at various points
and set markers at various
of interest
points of interest
within a defined range
BATTERY STATUS
Receive remaining battery
runtime estimate and
calibration instructions
SCAN LIST
View and
edit your
RF
list
SPECTRUM ANALYSIS
View all RF activity
scan
SINGLE FREQUENCY
MEASUREMENT
EDIT SCAN FREQUENCY
From this screen you
can edit all scanning
frequencies.
ENTER to start editing
frequency.
SINGLE BAR FREQUENCY
View and adjust thresholds
on any single frequency,
set markers and record
all measurements
MAIN MENU
Navigate to all main
measurement screens
and view unit details
inlcuding GPS data,
battery status, and
firmware version. Note:
Calibration is reserved
for BVS use only
Press