Advertisement
Operating Instructions
Pneumatic
Blowgun
WARNING
In order to reduce the risk of injury, the operating instructions and safety
regulations must have been read and understood!
Please read the operating instructions in full and for your own safety follow all of the instructions
contained therein.
Store the manual in a secure location.
Attention!
Remember that in accordance with the safety provisions of the Machinery Directive, a compressed air connec-
tion must not be made directly to the air inlet of the compressed air machine. Plug-in sleeves with pressed ends,
screwed into the air inlet of the device provide the greatest level of safety.
© Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen
Advertisement
Table of Contents
Summary of Contents for AirApp PB1
- Page 1 Plug-in sleeves with pressed ends, screwed into the air inlet of the device provide the greatest level of safety. © Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen...
- Page 2 Information for operation • Connect device to the compressed air supply. • Model PB1 is equipped with a rotating ring for starting and controlling the flow. • Models PB2, PB5 and PB10 start when the trigger is pulled. The blowgun stops when the trigger is released again.
- Page 3 Use the device only for the applications described. Any other use is prohibited. PB10 - Blow / Suction by turn the valve 180° © Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen...
Need help?
Do you have a question about the PB1 and is the answer not in the manual?
Questions and answers