Page 1
Microwave Oven Bracket Installation Instruction (Only to be used in models MO699SST-1/MO7080MW/MO7090MB/M07180TW/MO7280TB installation) Parts List & Before you start this installation make sure you have all the parts listed below. Hardware Read entire installation sheet before you start assembly of this item.
Page 2
Drilling the four holes to the Refrigerator: After ma rking the locations of the four (4) holes, remove the Microwave oven and bracket from the top of the refrigerator and proceed drilling the four (4) holes with a ¼” drill bit into the rear of the Refrigerator.
Page 3
Safety features : For your Safety, this metal bracket comes with two Lock Pins that will prevent the Microwave oven from tilting back while in use. These two (2) Lock Pins (provided) can be lifted and removed to allow you to clean the refrigerator top.