Download Print this page

Croydex Flexi-Fix Quick Start Manual

Wall mounted accessories

Advertisement

Quick Links

Tools required
THESE ARE SUPPLIED
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Safety and Care Advice :
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care
if there is any water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
- Always ensure that the drill hole passes through the central tiled area rather than
through the grouted area. To prevent damage to the tile, mask the area around the hole
with tape before drilling.
Additional Information :
- Maximum safe working load for the shelf is 2kg evenly distributed.
- Wall brackets can be removed by twisting the bracket in an anti-clockwise direction.
- Adhesive residue can be removed by carefully scraping the wall surface with a blunt instrument.
Important Adhesive Information :
- The adhesive is suitable for use on most flat finished surfaces, such as gloss paint, tiles, polished stone,
laminates and textured surfaces.
- Do not use on decorative wall paper finishes.
- Not suitable for unfinished materials such as brick, blockwork and loose, flaky surfaces.
- Redecoration may be required on some painted surfaces after removal.
WMA 058 R03

Advertisement

loading
Need help?

Need help?

Do you have a question about the Flexi-Fix and is the answer not in the manual?

Questions and answers

Summary of Contents for Croydex Flexi-Fix

  • Page 1 Tools required THESE ARE SUPPLIED KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN Safety and Care Advice : - Always take care when using power tools, particularly in the bathroom. - Always check for hidden cables and pipework before drilling and take extreme care if there is any water in the working area.
  • Page 2 Fitting Instructions for Flexi-Fix Wall Mounted Accessories WHEN USING EXISTING HOLES Remove old wall plate. FLEXI FIX WALL PLATE WILL FIT CAUTION! EXISTING HOLE CENTRES OF - (PLATE SHOWN FOR REF ONLY) ENSURE HOLES MAX - 34mm apart IN THE WALL...
  • Page 3 WHEN DRILLING NEW HOLES Using a pencil mark the TIP! RECOMMENDED SHELF screw hole centres for To ensure the towel WALL PLATE CENTRES the wall plates 30mm rail and shelf are apart. horizontal, mark 440mm the wall using one wall plate and CHECK use a spirit level to find the position...
  • Page 4 TO AVOID SCRATCHING and adjust DO NOT OVERTIGHTEN width as necessary. Towel rail adjustment Croydex Ltd, NOTE Central Way, Andover, Hants, SP10 5AW, UK If adhesive has exceeded its use Tel: +44 (0) 1264 365881 by date please use the contact...