Storage And Maintenance - Blaupunkt FIETE 500 User Manual

Storage and Maintenance

1. Keep the e bike in a place where there is no direct sunlight or no rain after riding.
2. Regularly check each screw of the e bike and to be tightened, and tighten it regularly;
(Screw torque of each main position: the head tube screw: 180-220kgf.cm;
Saddle screw: 180-220kgf.cm; front wheel nut: 250-300kgf.cm; rear wheel nut: 300-350kgf.cm)
3.If there is stain on the surface of the e bike body, use a soft cloth to wipe by a small amount of water; do not use alcohol,
gasoline or other chemical solvents with corrosive and volatile, otherwise it will seriously damage the appearance or internal
structure of the e bike body.
4.Chain elastic standard: chain up and down ≤ 10mm; if the chain is loose, the rear wheel nut can be loosened, the chain
tensioner can be adjusted to the chain fastening state, and the rear wheel nut can be tightened.
5.If the disc brakes and the disc plate friction, adjusting the position to make them no interference friction.
If the disc plate skew heavy or the disc brake is disabled, then the disc or disc brake needs to be replaced.
6.Every 3 months, apply grease to the frame folding wrench screws and maintain the chain smear chain anti-rust oil.
7. If the shock absorber fails or is damaged, it is necessary to disassemble the original shock absorber and
replace a new shock absorber to achieve the best shock absorption effect.
Do not flush the e bike with water to avoid accidents caused by internal electronic components and wiring.
Regular maintenance & check
Maintenance part
Brake Check the brake function,prevent accidents caused by brake dysfunction
Tire Check the tires condition and pressure, in case tires bursting or over power consumption during riding
Tire Rim Check the rim conditions, clean dirt, in case rim breaks or get stuck
Shock absorber Check the shock absorber condition, clean and lubricant, keep it in a good working condition
Throttle Check throttle condition, in case dysfunction or malfunction
Wires Check if the wires ports are loose or broken in case of wiring faulty
Screws Check the screws in the main parts, in case they get loose or fall off
Check the appearance and the battery performance,
Battery
in case of wiring faulty, extend the lifespan of the battery
Charger Check if the charger cable are impact, input and output plug are reliable
Lubrication Check if the axles and brake lights need lubrication or not
Cleaning Keep the bike surface in a clean condition
Tip: Please maintain and check the e bike regularly, to keep it in a best riding condition.
Maintenance purpose
37