Forch 6600 6285 Manual page 14

NEVER leave the product unattended during operation!
■
Installation, disassembly, maintenance and repair work must be performed by a qualified
■
electrician.
Compare the technical specifications of the product, power supply and peripheral devices.
■
These must be identical.
Do not repair defective products by yourself, but contact the dealer or manufacturer.
■
Do not modify or disassemble the product or its accessories.
■
Prevent excessive strain on the product, such as heat and cold, moisture, direct sunlight,
■
vibrations and mechanical pressure.
Only use in dry conditions.
■
Do not cover the product.
■
Risk of injury due to tripping or falling.
■
Warning levels
Warning against hazards that may cause injury in the event of disregarding the safety
instructions. Warning against hazards that may cause material damage in the event of
disregarding the safety instructions.
Description and function:
Power supply
These products are stabilised plug-in or desktop power supplies for charging and operating
IT and office equipment via a DC connection. They transform the supply voltage into a low
voltage and offer short circuit, overload and overcurrent protection.
Control elements
None; the operating LED lights up when a voltage is supplied to the input.
Correct usage
Any other uses than those described in the chapter "Description and function" are prohibited.
This product may only be used in a dry, indoor area. Disregarding or failing to comply with
these conditions and safety instructions can lead to severe injury and/or personal and
material damage.
Preparation
Compare the nominal voltage, supply voltage, supply frequency and polarity of the product,
■
connected device and power supply.
Pay attention to the type plate and do not overload the product.
■
Servicing, maintenance, storage and transport
The products are maintenance-free.
Material damage
Only use a soft, dry cloth for cleaning.
■
Do not use any cleaning products or chemicals.
■
Store cool and dry.
■