Advertisement
4. OPERATION
4.1.
Hold the stapler in one hand and point away from your body. Push in and down on the stapler feed bar and withdraw it from the stapler.
Insert new staples (fig.1) or nails into the guidance track. See (fig.5) for staple placement within the track. Reinsert the feed bar and hook
upwards to retain it.
4.2.
Prior to stapling, ensure that the stapler is correctly positioned and the sole plate is in firm contact with the surfaced to be stapled. Firmly
depress the trigger until the gun fires (fig.2).
4.3.
HOW TO CLEAR bLOCkAGES.
Remove the feed bar (fig.1) and any loose staples remaining in the guidance track. Using the tabs on the sole plate, pull the sole plate back and
downwards to hinge it away from the main body. Clear any damaged staples away from the staple exit path. Hinge up the sole plate. Pull back
on the tabs and move it back into position within the main body. (fig.3)
4.4.
The stapling force can be adjusted using the knurled knob in front of the trigger (fig.3X). Turn the knob clockwise to increase the stapling force
and anti-clockwise to decrease the stapling force.
4.5.
Staple removal. At the rear end of the sole plate is a semicircular protrusion that can be used to lever out driven staples. See fig.4.
.
fig.5
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, kempson Way, Suffolk business Park, bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
fig.4
fig.3
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
www.sealey.co.uk
AK7061.V2 | Issue:2 (H,F) 16/05/19
Advertisement
