Download Print this page

Placing An Emergency Call; Charging The Watch - Bay Alarm Medical SOS Smartwatch Quick Start Manual

Advertisement

3) Placing An Emergency Call

SOS Emergency
Button
1)
Locate the SOS button on the left-hand
side of the watch.

4) Charging The Watch

Power
Supply
Cable
1)
Connect the Cable to the Power Supply.
55%
4)
Check if the light on the Docking
Cradle lights up red. This means the
watch battery is charging.
2)
Press and hold the SOS button for 5
seconds. After 5 seconds, the watch
should be making the call to the
monitoring center.
Back of Docking
Cradle Charger
2)
Plug the other end of the Cable into the
port of the back Docking Cradle
Charger. Then plug the Power Supply
into the outlet.
100%
5)
Once the Docking Station light turns
green, the watch is ready to use.
00:10
+1 855-334-2548
Volume
Whisper Mode
3)
Once connected, an operator will ask if
help is needed through the watch.
Respond according to your situation. If
there is no response from you, the
operator will send emergency
personnel.
3)
Place the watch onto the Docking
Cradle Charger aligning the 5 prong
port of the watch to that of the Docking
Cradle.
Need Help? Call 1-877-522-9633
End Call
(EMS will still
receive the call)
4

Advertisement

loading