Advertisement
3.2.7.
undo and remove the stop.
3.2.8.
insert the sAe oP1 end punch and tighten fully up to the hexagon in
order to form the flare.
3.2.9.
unscrew the punch. the single flare is now complete.
3.2.10.
undo the locking screws and remove the tool from the pipe.
3.3.
creatiOn Of 3/16" sae DOuble flare
3.3.1.
follow steps in 3.1 above to form a single flare.
3.3.2.
reverse the punch and insert the sAe oP2 end into the tool and fully
tighten up to the hexagon in order to form the flare.
3.3.3.
unscrew the punch.
3.3.4.
undo the locking screws and remove the tool from the pipe. the
double flare is now complete.
3.4.
creatiOn Of a 4.75mm Din flare
3.4.1.
use the din tool and din punch as shown in fig.1.
3.4.2.
follow steps 3.2.1 to 3.2.7. to set the pipe length.
3.4.3.
insert the din punch and tighten fully to form the flare.
3.4.4.
unscrew the punch.
3.4.5.
unscrew the locking screws and remove the tool from the pipe.
note: After completing a flare, check that it has been correctly formed
using the gauge in the end of the 3/16" stop. if the flare goes into the bore
it is undersized and will need to be redone. this may be due to the pipe
being pushed back during the flare process.
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
impOrtant: no liability is accepted for incorrect use of this product.
WarrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
environmental protection
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
01284 757500
01284 703534
Pft11.V2 | issue 1 30/11/16
fig.1
www.sealey.co.uk
Web
sales@sealey.co.uk
Advertisement
