Control Devices - Atlantis A18-IRS06 Quick Start Manual

Control devices

 Touch My Home[
the account
 Touch the Smart IR icon [
 You can now add the IR remote control you want by following the instructions displayed in the
app. First touch on the type among those available (STB, TV, Air conditioner, TV Box, Fan, DVD
etc ..), then enter the device brand. Point the remote control towards the Smart Wi-Fi IR Remote
Controller and press at least 3 buttons. Then tap on Selct this one. A new icon will be created
on the home, corresponding to the new remote control. You can now try the cloned remote
control and verify that everything is working properly.
] then All Devices. The app will display all the devices connected to
]. Click on Add Remote Control [
You can remove the device by your account in one of the following 2 ways:
 (APP): My Home[
] then Remove Device and Confirm. The Blue LED starts to flash
(blinking twice per second).
 (Smart Wi-Fi IR Remote Controller): Power on device, push reset
for 6 seconds. The blue led is now rapidly flashing (at a
rate of twice a second).
If your device is not present in the library, you can still do the manual
association. Tap Add Remote Control, then DIY DIY [
follow the instructions in the app.
], tap on the device you want remove, tap [
3
ENG
].
]. Then