Advertisement
SPECIFICATIONS
FlexPoint 10/100
Description
10/100BASE-T Copper to 100BASE-FX Fiber Media Converter
Standard
IEEE 802.3
Compliances
Regulatory
UL, CE, FCC Class A, RoHS2 (6/6), WEEE, REACH
Compliances
Frame Size
Up to 1536 bytes
Copper:
Port Types
Fiber:
Copper:
Cable Types
Fiber:
AC Adapter (-1):
AC Power
Requirements
AC Adapter (-2):
DC Power
Voltage Range:
Requirements
Nominal Voltage:
Nominal Power:
Maximum Power:
W: 3.0" x D: 4.0" x H: 1.0"
Dimensions
L: 76.2 mm x B: 101.6 mm x H: 25.4 mm
Weight
Without AC Adapter:
Commercial:
Wide:
Temperature
Extended:
Storage:
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4,000m
Without AC Adapter (-0, -9):
MTBF (hrs)
Warranty
Lifetime warranty with 24/7/365 free Technical Support
FlexPoint 10/100
10/100BASE-T (RJ-45)
100BASE-FX (ST, SC, LC, SFP)
100BASE-BX (SC, SFP) Single-fiber
EIA/TIA 568A/B, Cat 5 UTP and higher
Multimode: 50/125µm, 62.5/125µm
Single-mode: 9/125µm
100 - 120VAC/60Hz
0.06A @ 120VAC (typical)
100 - 240VAC/50 - 60Hz
0.06A @ 120VAC (typical)
Terminal or Barrel
Molex Connector
Connector
5.0 to 32VDC
4.75 to 5.25VDC
9VDC
5VDC
0.5A @ 9VDC
0.8A @ 5VDC
1A @ 9VDC
1A @ 5VDC
6 oz. (170.1 grams)
0 to 50°C
-40 to 60°C
-40 to 75°C
-40 to 80°C
1,100,000
With AC Adapter (-1):
250,000
With AC Adapter (-2):
100,000
APPLICATION EXAMPLE
In this enterprise campus application example, FlexPoint
10/100 media converters are installed in a 14-Module
Redundant Power chassis for high-density fiber distribution
from UTP switch equipment at the Network Core. A UTP
workgroup switch (A) is connected via fiber with a standalone
FlexPoint 10/100 media converter. Another FlexPoint 10/100
converts the fiber to copper in a fiber-to-desktop application
(B). An Ethernet switch (C) is connected directly via fiber
to the FlexPoint module at the Network Core. In all cases,
multimode or single-mode fiber can be used, and fiber links
can be extended up to 120km using single-mode fiber.
Page 2
Advertisement
