Summary of Contents for ADAPT SOLUTIONS SPEEDY-LIFT
- Page 3 SPEEDY-LIFT...
- Page 4 After transferring out of your wheelchair, open the sliding door to your vehicle and retrieve the hand held pendant. Press and hold the OUT button until the SPEEDY-LIFT has reached its lowest point outside of the vehicle then release the button.
- Page 5 Once your wheelchair is outside of the vehicle, roll it away from the SPEEDY-LIFT. Press and hold the IN button until the SPEEDY-LIFT is fully stowed and then release the button. Place the hand held pendant inside the vehicle and close the door.
- Page 6 MANUAL BACKUP SYSTEM Your new SPEEDY-LIFT is equipped with a manual backup system that will allow your lift to be stowed manually. Please contact your dealer for full diagnostic and needed repairs. Locate the release handle on the side of the SPEEDY-LIFT. *CAUTION: The SPEEDY-LIFT up / down function is spring loaded.
- Page 7 BRACKET DESIGNED FOR A MANUAL FOLDABLE WHEELCHAIR Remove either ‘pin’ from the end of the upper cylindrical tube and slide it out from within the bracket. For the lower cylindrical tube, you must remove both ‘pins’. Once you have done that, slide the cylindrical tube to the left or right until the one side is free, then simply slide out the other side.
-
Page 8: Year Limited Warranty
Freight and other related repair charges will be the responsibility of the original purchaser. The only remedy for a defect in one of Adapt Solutions products shall be the repair or the replacement, at the discretion of Adapt Solutions, of the defective part or component. If repair or replacement is not commercially practical or cannot be timely made, Adapt Solutions may decide to refund the purchase price of the equipment instead of repairing or replacing the original equipment. - Page 9 Solutions dealer or Adapt Solutions with proof of purchase indicating the date purchased. Adapt Solutions will pay for shipping back to the purchaser within the continental United States and Canada if a defect in materiel or workmanship is discovered. Return freight and repair charges will be the responsibility of the purchaser if the problem is not covered by warranty.
-
Page 10: Warranty Registration
Defective parts must be returned by an authorised dealer, who will have received a prior return authorization from Adapt Solutions #1 Ltd. All warranted parts shall be sent to Adapt Solutions #1 Ltd prepaid.