Do you have a question about the 42955436 and is the answer not in the manual?
Questions and answers
Summary of Contents for KMART 42955436
Page 1
TREADMILL Key Code: 42955436 WARNING! READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. FAILURE OR INCORRECT OR EXCESSIVE TRAINING MAY CAUSE INJURIES.
Page 2
1. CAUTION To avoid injury please read this manual carefully before operating this machine. NEVER attempt to mount the treadmill whilst the running belt is moving. NEVER step off the treadmill while the running belt is moving. NEVER operate the treadmill if it is damaged or is not working as it should be. ...
2. SAFETY NOTICE Use the treadmill only for its intended use as described in this manual. Children, elderly users and pregnant women are advised NOT to use the treadmill. The treadmill should be used only by one person each time. ...
4. TECHNICAL SPECIFICATION Power Input AC220-240V Frequency 50/60HZ Overall Size 160.0 x 70.5 x 124.0cm Product total surface area 1.13m Maximum user weight 100kg Product total weight 36.5kg 5. ASSEMBLY INSTRUCTIONS & BOX CONTENTS Please check that all contents are present before assembling this machine: Parts &...
Page 5
Step 2. Take out 2pcs long screws (F) and 2pcs curved washers (G), connect the handlebars with upright tubes together. Secure them with screws and washers. Then put the cover (B) to armrest. Before fasten screws, please make sure the cables in the upright tube is not pressed by screws.
Page 6
6. CONTROL PANEL & OPERATING INSTRUCTIONS 1. Check and ensure the red power switch on the back of the machine is turned off. 2. The power supply socket should be turned off at the wall, then insert the plug of the power cable into the wall.
Page 7
PRESET PROGRAMS x 12 The speed and time of the preset programs are fixed and cannot be changed. The default time for the preset programs is 30 minutes. WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you feel faint stop exercising immediately.
7. FOLDING INSTRUCTIONS Make sure the machine is turned off and the power cable is disconnected. Unscrew the fixed M16 knob (C)and M12 knob (L), then lift the running board to close the machine, and lock the machine by M16 knob.
Need help?
Do you have a question about the 42955436 and is the answer not in the manual?
Questions and answers