Nokia NHM-1 Series Technical Documentation Manual page 5

CCS Technical Documentation
Open the connector carefully by using the SRT-6.
Repeat the same procedure on the other side of Dis-
play.
Push down the Earpiece from its guidance carefully. A
screwdriver can be used for this. Do not damage the
spring contacts of the Earpiece. Note the right position
of the guiding pin from the Earpiece when assembling.
There are two snaps, which lock the engine assembly.
Use the Opening Tool to release the snaps.
Issue 1 11/03
Company confidential
Disassembly and Reassembly Instructions
The Display is attached with four snaps to the Engine
Shield. Release the snaps by using the SRT-6 tool.
Now, the Display can be removed.
Unscrew the two TORX PLUS® size 6 screws, using the
order shown.
torque of 24Ncm have to be used.
Now the engine assembly can be taken away.
CopyrightNokia. All rights reserved
For assembly, the reverse order and a
NHM-1
Page 5