Page 3
ENJOY YOUR EQUIPMENT! Thank you for purchasing our home training equipment! Please make sure to read through these safety instructions carefully before using your Equipment. Should anything be unclear, do not hesitate to contact us! We hope you enjoy your new equipment. Train safe, have fun and level up! S P O R T S...
Page 6
PLAY IT SAFE The thickness of our equipment has an effect on how the equipment can be used. Most of our equipment for home use is 10 cm thick. This goes for the AirFloors, AirBeams, and AirBoards. The pressure in the equipment needs to be high enough to prevent you from hitting the floor and soft enough for a comfortable bounce.
SAFETY RULES These instructions apply to all inflatable equipment from AirTrack Factory that can be used at home as well as in a gym. Important: This equipment is not a toy. It is professional training equipment for gymnastics, cheerleading, tumbling, school sports, showgroups, martial arts, parkour, freerunning and tricking.
Page 8
SETTING UP & PACKING UP The thickness of our equipment has an eff ect on how the equipment can be used. Most of our equipment for home use is 10 cm thick. This goes for the AirFloors, AirBeams, and AirBoards. When our equipment is 10 cm thick the pressure in the equipment needs to be high enough to prevent you from hitting the fl oor.
Page 9
SET-UP Foot pump OV10 blower Make sure the adapter is placed on the hose properly (4) and the blower or footpump is set to infl ate (1,3). Open the grey valve by twisting it to the left (6). Make sure the pin inside the valve is pressed out (8). Attach the blower by twisting the adapter to the right (10) and turn on the blower.
Page 10
HELP! Does your equipment seem to be leaking? Make sure all valves are closed properly. The pin inside the grey valve are often left open (pin in) when the cap is closed, which means the valve will still be leaking air. Always make sure the valve is closed (pin out) before closing the valve.
Page 11
Is there a chance of damaging the equipment by over pressurizing it? No, the extreme pressure needed to actually damage our equipment cannot be reached with the blowers we supply. Do not use any blowers or compressors not supplied by AirTrack Factory or one of its distributors to inflate our equipment.
Need help?
Do you have a question about the AirFloor and is the answer not in the manual?
Questions and answers