Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NESA NRC-80H
Summary of Contents for NESA NRC-80H
- Page 1 NRC-80H Heavy Duty Hybrid AHD Rear View Camera USER MANUAL...
-
Page 2: Table Of Contents
CONTENTS INTRODUCTION ................2 COMPONENT LIST ..............2 TECHNICAL SPECIFICATIONS: ...........3 WIRING DIAGRAM .................3 TESTING ..................4 HOW TO TEST ..............4 TROUBLESHOOTING ..............4 CARE AND MAINTENANCE ............5 USING CONTROLLER TO CHANGE OUTPUT RESOLUTION ..5 "QUICK CHANGE" DEFAULT SETTINGS ......5 MENU CHANGE INSTRUCTIONS ........5 CHANGE THE DEFAULT MIRROR IMAGE TO REAL IMAGE (TO USE CAMERA AS FORWARD FACING OR USE WITH DVR). -
Page 3: Introduction
Our products are to assist and aid the driver, not to replace the manual function of the person operating the vehicle. WARNING Although the NRC-80H is a visual aid and will allow you to view • Do not disassemble the camera or cut the camera cable what is behind the vehicle, it does not remove the responsibility as this voids the warranty. -
Page 4: Testing
To Monitor soft moist cloth. USING CONTROLLER TO CHANGE OUTPUT RESOLUTION 12V + The NRC-80H camera has PAL and AHD settings by default. Default settings can be quickly changed by using the camera programming module (supplied). BUTTON The camera programming module has to be connected with the camera connector as shown in above figure. -
Page 5: Change The Default Mirror Image To Real Image (To Use Camera As Forward Facing Or Use With Dvr)
AHD OSD : Setup and Programming Press DOWN key to reach menu option RETURN, Press OK HYBRID CAMERA key to return to MAIN MENU. Using UP and DOWN key reach OSD MENU TREE 1. OSD MENU TREE to menu option SAVE & EXIT, press the OK key which will save the settings and will navigate out of the programming MAIN MENU LENS... -
Page 6: Setting Up The Menu
AHD OSD : Setup and Programming OUT. MODE AHD / CVBS EXIT SAVE&END NOT SAVE 1. OSD MENU TREE SETTING UP THE MENU (2) DC RESET DC LENS MODE 2DNR HIGH, MIDDLE, LOW, OFF When DC IRIS lens is used. (7) RETURN ►... -
Page 7: Exposure
- IRIS SPEED : Adjusts the IRIS SPEED in 0 ~ 15. 1. LENS (2) HSBLC GREEN / RED / COLOR (1) SHUTTER COLOR / RED / BLACK / WHITE / USER - MANUAL - GRADATION : Adjusts the gradation 0 ~ 2. ►... - Page 8 utton to finish the setting. y is greatly improved with the AUTO : Adjustable SENS-UP level between x2 ~ x30. <x4> 1. SHUTTER AUTO - RETURN : Returns to the MAIN MENU or SAVE& - GRADATION : Adjusts the gradation 0 ~ 2. 2.
-
Page 9: White Balance
6. DEFOG 4. RETURN 9. EXIT SAVE&END EXPOSURE 2. EXPOSURE - BLACK MASK : BLACK MASK ON / OFF. MAIN MENU - MODE : ALL DAY / NIGHT 7. RETURN greatly improved with the el is higher, the picture MIDDLE ►... -
Page 10: Black And White Image
Color or B / W is controlled by the signal coming from an external GPIO port. (3) BW (2) EXT - SENSITIVITY : - COLOR : GREE Color or B / W is controlled by the signal coming from an external GPIO port. The picture is always in black and white. -
Page 11: Adjust
RETURN : Returns to the DEFECT MENU - NEG. IMAGE : Negative ON / OFF. to 15 letters are available for the CAM TITLE. - WHITE DPC : White Dead Pixel Correction. or SAVE&END. D-EFFECT CAM TITLE WHITE DPC (1) SHARPNESS ase move the cursor to the letter to choose by using the UP and DOWN ... - Page 12 sensitivity. displayed. MAIN MENU SAVE&END. 1. CAM TITLE using the LEFT and RIGHT selection. 4. RETURN - RETURN : Returns to the SPECIAL MENU or SAVE&END. 1. SHARPNESS 6. RETURN AUTO 2. D-EFFECT 1. CAM TITLE 1. CAM TITLE - LIVE DPC : Live Dead Pixel Correction. A.
- Page 13 he LEVEL 0 ~ 255. vertical / horizontal position. ted in AREA SELECT. MOTION zontal position. ► 1. SELECT AREA1 se the MD - END AGC : Set to 255 Level for optimized definition at night. s to the DEFECT MENU or Determines the coordinate of the ►...
-
Page 14: Care And Maintenance
e set to NTSC or PAL ADJUST 5. OUT. MODE TV standard. 6. RETURN 1. SHARPNESS AUTO 2. MONITOR 3. LSC e set to NTSC or PAL ► 4. VIDEO.OUT NTSC 5. OUT. MODE WARRANTY TERMS & CONDITIONS OUT. MODE TV standard. - Page 15 OR ARISING OUT OF YOUR BREACH OF ANY PROVISION HARDWARE. OF THESE TERMS, YOUR MISUSE OF THE NESA OR NESA YOU AGREE THAT NESA IS NOT AN INSURER AND THAT NESA SERVICES, OR YOUR UNAUTHORIZED MODIFICATION OR ALTERATION OF PRODUCTS OR SOFTWARE.
- Page 16 TO INJURY OR LOSS IF SUCH AN EVENT OCCURS. THE INCURRED IN CONNECTION WITH USE OF OR EXPOSURE ALLOCATION OF SUCH RISK REMAINS WITH YOU, NOT NESA. TO ANY CONTENT POSTED, EMAILED, ACCESSED, OTHER THAN THE ABOVE PRODUCT WARRANTY FOR TRANSMITTED, OR OTHERWISE MADE AVAILABLE.
-
Page 17: Notes
NOTES... - Page 19 V1.0 All Images, Information and Content are Copyright © 2020 Neltronics.Australia Pty Ltd. All Rights Reserved. www.neltronics.com.au...