Related Manuals for FSM DS01+
Summary of Contents for FSM DS01+
- Page 1 Operating instructions Pressure transducer | DS01+ 27.04.2021 FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | messtechnik@fsm.ag | www.fsm.ag 1 | 6...
- Page 2 Maintenance and service ................................6 Zero point correction ...................................6 Cleaning ......................................6 Repair ......................................6 Accessories and spare parts ............................... 6 Technical data ....................................6 Disposal ....................................6 27.04.2021 FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | messtechnik@fsm.ag | www.fsm.ag 2 | 6...
- Page 3 > take measures to protect themselves against direct contact with live parts. > have read and understood the operating instructions. 27.04.2021 FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | messtechnik@fsm.ag | www.fsm.ag 3 | 6...
- Page 4 After the run-in time has elapsed, a zero point correction should be carried out to adjust the pressure transmitter to the ambient pressure (see 4.1 Zero point correction). 3.3.2 Setting the measuring range DIP-Switches Clamps Button S 27.04.2021 FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | messtechnik@fsm.ag | www.fsm.ag 4 | 6...
- Page 5 Time constant Position S5 Position S6 50 ms 500 ms 2000 ms / 2 s 4000 ms / 4 s 27.04.2021 FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | messtechnik@fsm.ag | www.fsm.ag 5 | 6...
- Page 6 Spare parts are to be obtained exclusively from the manufacturer. The replacement of the spare parts may only be done by the manufacturer or an authorized technician. Technical data Technical data can be found in the corresponding data sheet, which is available at www.fsm.ag, or can be downloaded using the QR code below. Disposal Danger Incorrect disposal can result in hazards for the environment.
Need help?
Do you have a question about the DS01+ and is the answer not in the manual?
Questions and answers