Advertisement
4. ASSEMBLY
Part
description
no..
1.
main Part
2.
Aluminium Plate
3.
nut with cap
Spring Washers
4.
Flat Washer
5.
Wheels With Brake
6.
7.
M12 Set Screw
8.
Supporting Arm
Aluminium Plate
9.
Wheels Without Brake
10.
4.1.
Remove with care all contents from outer packaging and check parts against parts list. Ref. to fig.2
4.2.
Place main part (1) on ground attach 2 Wheels with brakes (6) using flat Washers(5), spring Washers(4) and nuts with cap(3).
4.3.
Attach 2 Wheels(10) using flat Washers(5), spring Washers(4) and nuts with cap(3).
4.4.
Place supporting Arm(8) on ground attach Wheel(10) using flat Washer(5), spring Washer(4) and nut with cap(3).
4.5.
using m12 set screw, bolt main Part(1) and support Arm(8) together. the support arm can move in relatoionship to main part and can
be adjusted to position/design of side stand before bolt being thightened fully.
5. OPERATIOn
WARnIng! Ensure that you read, understand and apply
‰
the safety instructions before use.
WARnIng! DO nOT attempt to overload the dolly.
‰
5.1.
Loading.
5.1.1.
Position the dolly in a suitable area, checking that the surface
on which the dolly will be used is solid and flat.
5.1.2.
Apply the brakes to the two wheels
5.1.3.
Push the motorcycle on to the dolly positioning the rear wheel
centrally on the main part and support with the side stand on
the support arm adjust as required and fix in position by
tightening set screw. front wheel remains on ground.
5.1.4.
release the brakes to allow the dolly to be manoeuvred.
5.2.
Unloading
5.2.1.
Apply the brakes to the two wheels.
5.2.2.
Holding handle bars lift side stand and remove the motorcycle
from the dolly.
5.2.3.
store the dolly in a safe, dry, childproof location with the
brakes on.
6. MAInTEnAnCE
6.1.
Before use, check the frame assembly and platform for cracks and damage.
6.2.
regularly check that all fasteners are tight.
6.3.
Periodically lubricate the castors
Environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTAnT: no liability is accepted for incorrect use of this product.
WARRAnTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
QtY.
1.
1.
6.
6.
6.
2.
1.
1.
1.
3.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
note: image shows ms063A
01284 757500
01284 703534
fig.2
www.sealey.co.uk
Web
sales@sealey.co.uk
ms064 | issue 1 16/03/16
Advertisement
