Connection To Power Source; Connection To Load - Audiovox ADC700 Owner's Manual

CONNECTION TO POWER SOURCE

The ADC700 comes with positive and negative wires and clamps (Red = +,
Black = -) which are to be connected directly to the vehicle battery.
CAUTION: Reverse polarity connection will result in damage to the
Inverter.
If the inverter is connected to the incorrect polarity, the fuse will be blown. If
the unit does not function after replacement of the fuse, the unit must be
returned to Audiovox for repair. Repair expenses for this type of damage
are not covered by your warranty.
CAUTION: Do Not Use with positive ground electrical systems. (The
majority of modern automobiles, RVs, and trucks are negative
ground.

CONNECTION TO LOAD

The ADC700 is equipped with a standard AC household-type receptacle.
Plug the cord from the equipment you wish to operate into the AC recep-
tacle. The green LED indicator will illuminate to indicate that the unit is
functioning. Make sure the load requirements of your equipment are within
the parameters of the ADC700 output. If so, turn on your equipment. If an
audible alarm sounds, refer to sections 2, 3 or 4 of this manual for probable
causes.
7