Advertisement
MAINTENANCE
®
The VentSafe
requires no scheduled lubrication or
maintenance.
INSPECTION: The VentSafe
debris by following the disassembly and reassembly
instructions. The body may be checked for cracks
and gouges and the screen for tears. The neoprene
gasket may be inspected for aging, tears or deep
scratches.
®
may be checked for
FIGURE 2. VENTSAFE
PARTS AND SERVICE
Parts and service are available from your local
representative or the factory.
Valve Size and Model Number located on the valve
nameplate and contact:
Val-Matic Valve and Manufacturing Corp.
905 Riverside Drive
Elmhurst, IL 60126
Phone: (630) 941-7600
Fax: (630) 941-8042
www.valmatic.com
A sales representative will quote prices for parts or
arrange for service as needed.
®
INSTALLATION
2
Make note of the
Advertisement
