Table of Contents
Advertisement
Important Notice
When the time setting of the computer applies to either of the following conditions, set the time according to the
procedures (1) to (3).
・When change the time setting to 2 hours before and after the DST start and end time.
・When change the time setting between 2 hours before and after the DST atart and end time.
(Example:When the DST start time is 3/13 2:00, change the time setting to 3/13 from 12:00 to 4:00.)
(1)Close the management application.
(2)Change the time setting of the computer.
(3)Set the time of this unit according to the section "Preparation for Setup" of this manual, " 1 Power
Supply"(8)(9).
screen can indicate an incorrect value.
perform correctly.
start
correctly.
5
Advertisement
Table of Contents
