Restore Default Setting; Change The Login Password - Juplink RX4-1800 User Manual

9.2. Restore Default Setting

9.2.1. Manual Restore
Press the Reset Button for about 10 seconds on the rear panel of the router. Then, wait two
minutes for the router to reset and reboot.
9.2.1. Setting Page Restore
1) After logging in to your router, click Basics > System.
2) Click Restore Default button in Restore Default Setting page.
3) Wait a few minutes for the router to reset and reboot.
Note: During the resetting process, do NOT power off the router.

9.3. Change the Login Password

The account management feature allows you to change your login password of the web
page.
1) After logging in to your router, click Basics > Security.
2) Set your password under Modify Password.
3) Click Apply button, and then use the new password from the next login.
The current firmware does not support modifying the username.
Note:
58