Elecom P-SSB Series Manual

Selfie Stick for Smartphones (Wireless type with mirror)
Attachment method
Component name and structure
Smartphone
holder
Screw
Shutter
button
Stick
4
When photographing using
the in-camera
Loosen the screw on the side of the
selfie stick, adjust the angle of the
smartphone so that its screen is facing
front, and then tighten the screw.
* Be sure to loosen the screw before performing angle
adjustments. Failure to do so may cause damage to
the selfie stick or the attached device, or other
accidents.
Safety precautions
When attaching a device to this product, securely tighten the parts indicated in the attachment instructions. If the device is not securely fixed in place, it may be damaged by
a falling off of the product.
When using this product, follow the precautions below: Coming into contact with the surrounding people or objects with this product may lead to accidents and other
troubles.
Do not swing the stick around.
Be sure to retract the stick when walking around.
Check the surrounding area before you extend the stick.
Correctly attach the device to this product according to the attachment instructions. Attaching the device incorrectly may cause the device to malfunction.
The fixing part of the device to this product may be loosened depending on the fixing position or the environmental condition. Before using this product, confirm that the
holder is securely fixed in place. If it is not securely fixed, tighten it again.
Note that we take no responsibility for malfunctions or damage to the device, personal injury, or other troubles resulting from the deviceʼ s falling or dropping.
Never disassemble, modify, or otherwise alter this product.
Exercise caution when using this product in places without secure footing (such as slippery locations and staircases).
Avoid using or storing this product and/or the device in places with high temperatures, humidity, or direct sunlight. Failure to do so may cause deformation or deterioration
of the product and/or the device.
This product is intended to be used to take selfie photographs. Do not use this product for anything other than the intended purpose.
Be sure to attach a device supporting the specification required. Failure to do so may cause a falling off of this product and injuries.
Stop using this product when cracks, damage, deformations, or deteriorated parts on the product are found.
Store this product out of the reach of infants.
Do not swing around the product with the device attached. Otherwise the device may be damaged by a falling off of the product.
Exercise caution not to pinch fingers or hands when fixing the device to this product.
After having attached the device, do not apply excessive force to this product and/or the device. Doing so may cause damage to this product and/or the device.
Do not move around with the device attached to the product. Otherwise the device may be damaged by a falling off of the product. Be sure to remove the device from the
product before moving around.
Be careful not to scratch the device by frequently attaching the device to and removing the same from the product.
When extending or retracting the stick of this product, be careful not to apply excessive force. Doing so may cause deformation of this product or other problems.
Note that we do not take any responsibility for any losses or damages resulting from any act contrary to the above-mentioned matters, including the misuse of or
modifications made to the product.
* For details on how to use the shutter button,
please check the separate instructions
1
Mirror
Raise the smartphone
holder of the smartphone.
When photographing using
the out-camera
Loosen the screw on the side of the
selfie stick, adjust the angle of the
smartphone so that its back side is
facing front, and then tighten the screw.
* If the angle is adjusted such that the back side of the
smartphone is facing front, the shutter button will be
faced downward. For easy handling, unscrew the
holder and attach it in the opposite direction; this will let
the shutter button come upward.
*These illustrations are for illustrative purposes only.
2
Insert the smartphone into the
smartphone holder.
* Insert the smartphone into the smartphone
holder so that it does not interfere with the
operation buttons on the sides of the
smartphone.
* Check that the smartphone is securely held in
place before using the selfie stick.
Camera Application
This product does not guarantee all the
applications enabled by the smartphone.
Operational error may occur depending
on the type of application. In such a case,
be sure to use the genuine application.
In "ELECOM CO., LTD. (Japan)" , no customer support is available to
inquiries about purchases or usage in/from any other countries than
Japan. No foreign languages other than Japanese is also available.
Replacement will be made under stipulation of the Elecom warranty,
but not available from outside of Japan.
A customer who purchases outside Japan will contact for inquiries the
local retailer in the country of purchase.
3
Adjust the stick to your preferred
length.
MSC-P-SSB ver.111