Advertisement
PLC-RX (4L-500) Power-Link Receiver Switch
Thank you for purchasing a Power-Link receiver card. This card is
intended to operate with a Power-Link control such as the PLC-
TX6, PLC-TX, or PLC-TXSW and can bring the Power-Link
advantage to any existing light, supporting up to 3-amps per
channel.
System Features:
Your complete system should include:
o
PLC-RX 2-channel receiver card
o
Magnet for programing.
Installs easily!
o
Our breakthrough technology allows you to gain complete control over the
lighting on your truck with minimal wiring time or effort
TowMate, LLC. : 15827 Serenity Point Ln. : Rogers, AR 72756 : Phone (800) 680-4455 : Fax (479) 925-3494
By:
Advertisement
Table of Contents
Summary of Contents for TowMate Power-Link PLC-RX (4L-500)
- Page 1 Our breakthrough technology allows you to gain complete control over the lighting on your truck with minimal wiring time or effort TowMate, LLC. : 15827 Serenity Point Ln. : Rogers, AR 72756 : Phone (800) 680-4455 : Fax (479) 925-3494...
- Page 2 Configuration Instructions: *Once you have successfully connected to the 12V system and have communication with the Power-Link control (PLC-TX/PLC-TX6/PLC-TXSW), a TowMate, LLC. : 15827 Serenity Point Ln. : Rogers, AR 72756 : Phone (800) 680-4455 : Fax (479) 925-3494...
- Page 3 4. Repeat this process for each channel you program. (Fig. 1) Channel #1 Channel #2 TowMate, LLC. : 15827 Serenity Point Ln. : Rogers, AR 72756 : Phone (800) 680-4455 : Fax (479) 925-3494...
- Page 4 Instead, tie into power and ground on the same circuit from either component and you’re done! Made in USA Lifetime Warranty TowMate, LLC. : 15827 Serenity Point Ln. : Rogers, AR 72756 : Phone (800) 680-4455 : Fax (479) 925-3494...
Need help?
Do you have a question about the Power-Link PLC-RX (4L-500) and is the answer not in the manual?
Questions and answers