Introduction - Tecnoware FSTEL1K2M User Manual

ENGLISH

1 Introduction

Principle of compensated AC Voltage Regulator
TECNOWARE Electronic Stabilizer is an AVR (AVR means Automatic Voltage Regulator): this product is the result of
constant technological research aimed at obtaining the best performance at the lowest cost.
This product is a compensated type AC voltage regulator.
It consists of MCU control unit, voltage regulator unit, compensator transformer, adjust transformer, and
input/output protection components, etc. (see figure 1).
When the grid voltage is not stable, MCU control unit samples the output voltage, and according to the
requirement of setting accuracy, keeps the output voltage within the desired voltage range, by means of
adjustment of the voltage regulator unit.
AVR has a short response time, high efficiency, high reliability, can work continuously for a long time. It is
applicable for all kinds of instruments, meters, communications, home appliances and work site.
This manual is a guide that enables you to correctly install and use your AVR. This
manual includes important SAFETY instructions for the operator, for the AVR correct
installation, and gives useful advice on the product maintenance. For any type of
problem, please refer to this manual before calling the customer service.
Electronic Stabilizer is constantly being developed and improved: consequently, your unit may differ somewhat
from the description contained in this manual.
User's manual
Figure 1 – Block Diagram of Electric Stabilizer
2
ELECTRONIC STABILIZER