Advertisement
Safety Precautions
1:Dont install this unit at the place of excessive heat & moisture,and install
at the place of good ventilation.
2:Dont install this unit at the place of moisture or dust.
3:Make sure that input/output terminals are connected well.
4:Make sure to connect PIN PLUG of a connection cord,incomplete
connection causes no sound or noise.
Before Installation
1 The subwoofer can be placed anywhere,we adviced that put on the
corner house or near the wall,coming out the sound is most optimized.
2:The sub.is placed at least 10cm from the walls.
3:Keep distance and reduce the volume of sub.,too close to other audio
equipment may casue noise.
Specifications
Driver diameter..................................12inch
Power output RMS..............................200W
Input sensitivity.................................600mV
Sensitivity............................................90dB
Phase settings....................................0-180
Input type............................................Line in & high level in
Power voltage......................................220V-240V/50Hz
and 110V-115V/60Hz
12 " Active Subwoofer
Operation Manual
Advertisement
Table of Contents
Summary of Contents for Martin Roland SW-12
- Page 1 Safety Precautions 1:Dont install this unit at the place of excessive heat & moisture,and install at the place of good ventilation. 2:Dont install this unit at the place of moisture or dust. 3:Make sure that input/output terminals are connected well. 12 "...
- Page 2 We express our heartful thanks to the consumers who have purchased our products.please read this operating instruction thoroughly in order to make the best use of many features and controls of this unit,after audio out 1 reading this manual,please keep it well for future use in case of audio out 2 difficulty or trouble.
Need help?
Do you have a question about the SW-12 and is the answer not in the manual?
Questions and answers