HearthSong Garage Tunnel Racer Safety And Assembly Instructions

TM
Tunnel Racer
Safety and Assembly Instructions
Includes:
2 Rechargeable racers
1 Strobe ball with non-replaceable batteries
2 Remotes (each takes 2 AA batteries, not included)
2 USB charging cables
Battery Installation and Charging:
Racer:
1. Racer must be turned off in order to charge.
2. Using provided USB cable, plug vehicle into
power source.
Track Set-Up:
Curved Pipes
To form curved pipe, connect two curved
halves by snapping them together.
Curved pipes must be assembled with
precision fit in order for racer to oper-
ate properly. There will be a total of 12
curved pipe sections for your track.
#733426 Conforms to ASTM-F963 Made in China. ©HearthSong
733426_HSG-TunnelRacer_Instructions.indd 1
71-Piece Track Set
24 Curved
halfpipe pieces
2 Entrance pipes
4 Long pipes
Remote:
1. Remove the battery compartment cover with a screwdriver
(not included).
2. Insert 2 AA batteries per remote (4 total, not included)
by matching the +/- ends.
3. Resecure cover.
Connectors
Twist to
lock
2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com
®
WARNING:
CHOKING HAZARD—
Not for children under 3 yrs.
2 Short pipes
24 Connectors
4 Intersections half pieces
4 Pipe clips
Locked position
Line up tabs on the
pipes and grooves
on the connectors.
Insert the pipe into
the connector, then
twist to lock.
#733426 | Ages 5+
Adult assembly required.
This toy contains a small ball.
Connector
7/30/20 9:14 AM