Advertisement
NOTE:
• In any play mode, it starts operation automatically after seconds
without pressing "
" button.
• "
" button works during any play mode to hold or resume the
current play mode.
• To cancel current play mode
1. By Pressing " PLAY MODE " button during play to change play
mode.
2. By Pressing PLAY MODE button during play until "Repeat Off "
appears on the display. It goes back to normal play.
Progm (PGM) Play - Playing the selections in the desired
order
1. In stop mode press PROGRAM button until "PGM"
and a flashing "00 " appear in the display
window. "00 " means track number indication,
P-001 means program number indication.
2. Press "
" or "
" or Multi-Jog Rotary to select.
For example track number 5 as first selection,
the display shows:
3. Press PROGRAM button , your first selection 5
will be registered. At this moment, the trake
number indication will return to a flashing "00 "
and the program number indication will skip to
P-002.
Now it is ready to begin your second selection.
4. Repeat steps 2 and 3 until memory is full
(possible up to 32 songs).
5. Press "
" button, your first selection 5 and its'
program registered number P-001 appear on the
display. It starts play from first selection
6. To stop the program, press the "
" button.
NOTES:
• Repeat play and " INTRO " play can be performed during program
play.
• The program is also erased when the disc compartment is opened
or the auto power off function turns the power off.
• If the program mode is exited by means of the "
programs would still remain in memory.
Program Edition
To check: Press " PROGRAM " lightly during programming before you
press "
" . Each time " PROGRAM " is pressed the track number
appears in the display window.
To delete: When open the CD door including that program will be
cancelled.
DIGITAL ANTI-SHOCK SYSTEM
With a conventional portable CD player, you might have experienced
that the music stopped. e.g. When jogging the ELECTRONIC SKIP
PROTECTION protects against loss of sound caused by vibrations
and shocks.
Continuous playback is ensured. However, it does not protect the set
against any damage caused by dropping!
• Press the DIR/FILE/ESP button during playback to activate the
shock protection.
"
" is shown and the protection is activated.
• To deactivate the shock protection, press the DIR/FILE/ESP button
to OFF the ESP.
"
" goes off and the protection is deactivated.
NOTE: When playing MP3 tracks, the ESP feature is automatically
activated, regardless of the ANTI-SHOCK button setting.
MP3 - CD PLAYBACK
To play MP3-CDs
• This set can read CD-DA, MP3 disc.
1. Place a MP3 CD-ROM with the label side up.
Push the CD centre lightly to set it in position.
2. Press "
" to start playback.
The display shows "
" and the current
track number and its' elapsed playing time.
3. Press "
" button to stop playback.
Searching a track/album
• You can search a track/album at playback mode or stop mode.
• In stop mode. The display will show the total number of tracks, and
the total number of albums.
1. Press "
" or "
" to search a track/album.
By the MULTI-JOB rotary, user can search a track (file) in
high-speed.
2. If in stop mode, press "
" to start playback.
3. If you wish to start playback from another track within the album,
press "
" or "
" briefly and repeatedly until the display shows
the desired track number.
Searching a file
Basically this system support two kinds of file search mode to search
a file at high-speed.
The one is to search a directory level; the other is to search a file
number.
Following sequence is the method to search a file.
1. Press the DIR/FILE/ESP button to make directory
search mode (default is file search mode).
Wording " DIR " appears in the left upper corner
of the display.
2. Press "
" or "
" or Multi-Jog Rotary to search
a directory and then directory number is
displayed.
3. Press DIR/FILE/ESP button again, wording "DIR" disappears. It
goes back to the default (file search mode).
4. Press "
" or "
number is displayed.
5. Press "
" to play the file if system is in stop mode.
6. During searching the file, file number is shown on the display.
Smart find function
1. Press the SMART FIND button at stop mode.
The display shows:
Press ENTER button to select. Display shows
"Smart Find" " _ " and is ready for editing.
2. Press SMART FIND button to change into
album find mode. The display shows: Press
ENTER button to select. Display shows "Smart
Find" " _ " and it is ready for editing.
For Editing
3. Rotate MULTI-JOG to select character.
Character will be changed from 0~9 to A~Z.
4. Press ENTER button to input a selected
characters.
5. Repeat steps 3 and 4. Up to 8 characters can
be input.
6. Rotate MULTI-JOG button to select space
character, then press ENTER button to confirm,
which is between "0" and "z".
7. If mistake, press SKIP button to change input position. And repeat
steps 3 and 4.
8. Press ENTER button to search file or album.
9. Press ENTER or "
DISPLAY FORMAT FOR DOT TRIX LCD
Following display format is based on two line X12 characters dot-
matrix LCD display.
Some ICONs can be inserted
• When power on and TOC reading
" button, all the
• When cannot detect disc
• When search a track (CD-DA)
•
When search a track (MP3)
•
When playing a track (ESP)
• When stopped (ESP)
• When pause (CD-DA,ESP,MP3). Elapsed time will be blink 0.5 seconds
interval
• While programing memory (CD-DA) "00" means waiting mode until a track is
specified, "P-001" means programmed order
• While programing memory (ESP)
• When Smart Find function is enabled
• By pressing ENTER button
•
By rotating MULTI-JOG
• By pressing ENTER button one more
• When file is not found
• When door open
• When STOP button was pressed to go stand by mode. System will be power
off after a few seconds
" or Multi-Jog Rotary to search a file and then file
" button to play searched file or album.
•
When MP3 volume reading
•
When cannot detect MP3 file
•
When search a track (ESP)
• When playing a track (CD-DA)
• When stopped (CD-DA)
• When stopped (MP3)
• When programing memory (MP3)
By pressing ENTER button
By pressing ENTER button
A flashing " _ " will appear on the
display.
• When found 30 files with file
"
name "AXXXXXX
After 2 seconds
TROUBLE SHOOTING GUIDE
Should any problem persists after you have made the following checks,
consult your nearest service facility.
Disc play does not start:
• The disc is inserted upside down or incorrectly. Insert the disc
correctly with the label surface up
• Dusty or defective disc
• Dirty or dusty lens
• The disc compartment lid is not closed
• Moisture condensation -> Leave the unit in a warm place until the
moisture evaporates
• The AC power adaptor is not plugged into the wall outlet
• The unit is not placed on a level surface
• Weak batteries
No sound from the headsets:
• The headphones / earphones plug is not firmly connected to the
" PHONES " jack
• Adjust the " VOL " control
• Dirty plug
Skipping of sound:
• Dirty or defective disc
• Dirty lens.
• Strong vibration
When using with batteries the battery life is short:
• Manganese batteries are used. Use alkaline batteries
The unit cannot be operated:
• No disc , dirty disc or scratched disc. The unit will return to full stop
mode after approx. 30 seconds, or reset the player by pressing
and holding "
" down for about 2 seconds and then insert a disc
to start playing.
• When recording on CD-R discs, use 74-minute (650M) discs. Do
NOT use 80-minute (700M)
• The CD-R or CD-RW discs should be "finalized" in computer by
"single section format"
• We continually strive to improve our products, specifications may
change without prior notice.
MAINTENANCE
Cleaning the unit
Do not use volatile chemicals on this unit. Clean by lightly wiping with
a soft cloth.
Cleaning CD
If the CD skips or will not play, the disc may need to be cleaned.
Before playing, wipe the disc from the centre out with a cleaning
cloth. After playing, store the disc in its case.
Handling the disc
Only touch the CD on the edge to avoid finger prints on its surface. Do
not stick paper or tape nor write anything on the surface.
SPECIFICATIONS
General
Output (at 1KHz 0dB level)
Headphones / earphone (stereo mini
jack)
15 mW + 15 mW at 16W to 32W
Power requirements
2 size " AA " (LR6 or SUM-3) alkaline
batteries, or DC IN 6V, 450mA
power adaptor
Polarity of plug
Dimensions
Approx. 129 x 33 x 141 mm (W/H/D)
Weight
Approx. 249g (not include batteries)
Operating voltage
AC100V 50/60Hz (Japan)
AC120V 60Hz (U.S.A, Canada)
AC220-240V 50Hz (Singapore,
Malaysia & Thailand)
AC230V 50Hz (Chile)
AC230V-240V 50Hz (Europe)
AC240V 50Hz (Middle East & Australia)
We continually strive to improve our products, specifications
may change without prior notice.
811-873191-010
Printed in China
Advertisement
