AIDIAN Nova StatStrip Brief Instructions

Brief instructions
Nova StatStrip Glucose and
ß-Ketone Hospital Meter
Welcome
Welcome
NICU-1
Your Facility
Facility:
NICU
Location:
Press OK to begin testing
Batt: Mem:
View
Review Login
Setup
1
Press Login and
scan or enter
Operator ID.
Press Accept.
Apply Sample
Touch test strip to Level 1 QC drop
Remove test strip to cancel test
6
Enter sample to the end of the strip by
touching the strip to the QC drop or patient
blood. Keep the meter on flat surface or upright.
Gently mix the control solution before use and
discard the first drop of control material.
Do not get sample material into the strip port.
Patient Test
Patient Test
Glu
QC
Manual MENU
Accept
Review Logout
2
Switch to quality
control test by
pressing QC or press
Accept to perform
a patient test.
Touch test strip to blood drop
Remove test strip to cancel test
Note:
Enter Strip Lot
Clear
Accept
3
Scan strip lot
number from
the barcode at the
test strip vial and
press Accept.
QC Result
QC Result
Op: 8636
QC Lot: 0213806081
Level: 1
Strip Lot: 0206806099
QC Pending 07/19 06:19
Glu
PASS
4.4
mmol/L
Range 4.0-4.8
Accept Comment
7
The meter will display the result. Patient
test result can be accepted my pressing
the Accept button. By pressing the
result can be rejected and a comment can be
added to the result with the
For QC material the meter will show
Fail to indicate if QC test was passed.
Use ejector button on the back of the meter to
eject the used strip.
Enter QC Lot
Clear
Accept
4
Scan or enter
patient ID or QC
material LOT number.
Press Accept.
Patient Result Patient Result
Pt ID: 194546646
Darryl Smith
Strip Lot: 0206806099
07/19 06:19
Patient Pending
Glu
5.7
mmol/L
Normal 3.9-6.1
Reject Accept Comment
Reject button
Comment button.
Pass or
www.aidian.eu
Insert Strip
Insert Test Strip in meter
Cancel
5
Insert test strip
into meter.
Please consult
the instructions
for use before
performing
the test.
Additional
features may be
enabled for the
meter.