Audiovox CE150MP Operating Instructions Manual page 6

FEATURES
Programming track numbers
You can select up to 24 tracks and store them in the memory in a desired sequence. You can
store any track more than once.
1 While playback is stopped, press PROGRAM to store
the track.
PROGRAM " P " lights up, the track number
programmed and the total number of stored tracks are
displayed.
2 Select a track by directly entering track number.
(Example press "1" and "3" to program track 13).
* Press ENTER button once after each track number
desired.
3 Select and store all desired tracks in this way.
* Press one more ENTER button to select the
programming.
4 Press PLAY button to start playback of your selected
tracks.
You can review the program by pressing SKIP button
when playback is stopped. The display shows all stored
tracks in sequence.
Note : - If you press PROGRAM and there is no track selected, after 10 sec. It will go
back to Normal position.
Erasing the program
If necessary, press STOP button to stop playback.
Note: The program will also be erased if you
- interrupt the power supply,
open the CD lid, or
-
- the unit is switched off automatically.
ESP
The ELECTRONIC SKIP PROTECTION protects against loss of sound caused by vibrations
and shocks.
Continuous playback is ensured. However, it does not protect the unit against any damage
caused by dropping!
Note: When playing MP3 tracks, the display will read "Welcome MP3", and the ESP
feature will not appear but will automatically be activated, regardless of the ESP
switch setting.
9
FEATURES
Selecting different playing options – MODE
It is possible to play tracks in random order, to repeat a track or the CD and to play the first
few seconds of each track.
1 Press play MODE during playback as often as necessary until the display shows either:
- REPEAT 1 : The current track is played
repeatedly. "REP 1" is displayed.
REPEAT ALL: The entire CD is played
-
repeatedly. "REP A" is displayed.
- REPEAT "D": The current directory file is
played repeatedly. "REP D" is display.
- "Intro": The first 10 seconds of each of the
remaining tracks are played in sequence.
" INT " is displayed.
- RANDOM: All tracks of the CD are played in
random order until all of them have been played
once. " RND " is displayed.
- Repeat Directory all songs within a directory are played repeatedly in order
(MP3 only).
2 Press play in selected mode to begin.
3 To return to normal playback, press play MODE until
the mode feature display indication disappears.
10