Advertisement
SIBLEY
600 TWIN ULTIMATE
®
SIBLEY
600 TWIN ULTIMATE PRO
®
SETUP INSTRUCTIONS
Walls up?
If it's a hot day there is nothing better that rolling the walls
up and letting the breeze brush over you. Simply unhook the
loops at the bottom of the canvas walls from the pegs and roll
up (inwards) and tie using the strings provided. It is vital that
the walls are rolled back down and attached to the floor if the
tent is left unattended for some time (over night etc) With the
walls up you have created a massive kite that's just waiting to
take off should the wind get up. Don't get caught out and end
up with a broken tent.
This is how to get your tent back in the bag without
hassle
Take all the poles and pegs out of the tent and fold the tent
1
over itself so you end up with a big rectangle. Keep the tent on
the groundsheet and off the ground to keep it clean and dry.
Place the tent bag above the top of the tent so you have a
2
template for how wide you want the tent to end up. Now start
folding in from the sides keeping it the right thickness to fit in
the bag.
1
Once you have folded the tent into a strip that is the same
3
width as the bag fold both ends in so you end up all the guy
ropes tidied in and a strip of about a meter long.
Once all sides are dry fold it over on itself until you end up
4
with a square. Roll the whole thing into a tight bundle, using
the ties to secure thevtent in a roll. Next, lift one end and slip
the bag over the tent.
(Sometimes it's not possible to get the groundsheet bone dry
in the field, if that's the case roll up the dry tent into it's bag,
roughly pack up the wet ground sheet and pop it in something
waterproof. Once home dry it out and continue putting the
tent away).
Enjoy your Sibley tent, and remember: please only store it
bone dry.
2
3
3
4
Advertisement
