Audiovox NPC5400 User Manual page 36

Audiovox npc5400: user manual
Table of Contents

Advertisement

Available languages

Available languages

Symptoms
Possible cause / remedy
Guidance
Check if "Voice messages" is activated in the
information not
"Settings" menu.
audible.
Check the "Settings" menu if "Volume" is not set
to the minimum.
If no external speaker is connected:
Check the setting of the speaker volumes on the
monitor or use + on the remote control..
Some symbols
Activate the appropriate entries for "Status line
depicted in the
right" and "Status line left" under "Settings" in
operator's manual
the "Monitor setting" menu.
do not appear on
the status line.
The satellite symbol
No satellite signals are being received.
in the GPS logo is
Ensure that the GPS antenna is not covered by any
continuously red.
objects.
DVD/CD is
The DVD/CD may be soiled: Clean with a special
automatically ejected
DVD/CD cleaning fluid.
by the navigation
system.
Time shown on
Set the correct time zone in the "Settings" menu,
the status line is
function "Date/Time." Verify that you are not
incorrect.
displaying ETA.
Address cannot be
Address book is full: Delete one or more entries that
stored in the address
are no longer required.
book
Guidance is not
An inaccuracy of approx. 150 feet is within the
accurate.
tolerance limits: Please contact an authorized dealer
if greater inaccuracies occur repeatedly.
Displayed position
GPS reception is interrupted for too long. Once GPS
does not correspond
reception is sufficient, the position will be corrected
to actual vehicle
automatically. If necessary, wait for several minutes.
position.
Have your service shop check whether the navigation
computer's installation angle was entered correctly
in the diagnostics menu.
TROUBLESHOOTING
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Npd5500

Table of Contents