Hidrotermal HIDRO-PW100 Installation And Maintenance Manual

HIDRO-PW100
WALL MOUNTED UNDERWATER LED SWIMMING POOL LIGHT
INSTALLATION AND MAINTENANCE MANUAL
P l e a s e r e a d t h i s o p e r a t i o n m a n u a l c a r e f u l l y
a n d k e e p i t f o r f u t u r e r e f e r e n c e .
 Only a licensed or certificated electrician or a qualified serviceman is allowed to install or
maintain this product.
 Must be installed in accordance to the requirements of your government standard or local
authorities.
 Never handle it with wet hands and feet.
 This light is design for use only when fully submerged in water.
 Never operate this light for more than 1 minute unless it is totally submerged in water.
 All lights are required to be disconnected from the main electricity before any operation of
maintenance.
 Maximum depth range for the light installation: 1-10 meter.
 Maximum water temperature range for the light: -20℃-35℃
Section 1 Technical Parameters
Vo l t a g e ： □ 1 2 V □ 2 4 V
□ A C □ D C
P o we r ：
SMD LED
□10W □20W □30W
D i m e n s i o n : Φ295*70m m
Mo d e l ： H I D R O - PW 1 0 0
W AR N I N G
High Power LED
□12W □18W □24W
1