Related Manuals for Boekel 133000
Summary of Contents for Boekel 133000
- Page 1 Boekel Incubator Models 133000, 133000-2 & 133000S Operating Instructions N2400181 Rev. 1 05/11...
-
Page 2: Table Of Contents
CONTENTS Page Safety ....................... 2 Product Information ................... 3 Assembly......................3 Unpacking ..................... 3 Installation ..................... 3 Operation ......................4 Controls and Indicator Lamps (see Figure below) ......... 4 Setting the Temperature ................5 Operating the Incubator ................. 5 Accessories ...................... 5 Removable Shelf –... -
Page 3: Safety
Safety The following symbols marked on the equipment mean: Caution: Read these operating instructions fully before use and pay particular attention to sections containing this symbol. Attention: Suivre attentivement les instructions avant l’usage et prêtez une attention particulière aux sections comportant ce symbole. Caution: Surfaces can become hot during use. -
Page 4: Product Information
2. Product Information The Boekel series of Incubators are designed for laboratories and clinics that require contemporary styling, accuracy and economy in a basic incubator package. The incubator uses a dial controlled thermostat and has the added features of a digital temperature display and a double walled chamber door. -
Page 5: Operation
SHELF INSTALLATION DIAGRAM STEP #1 STEP #2 90° SHELF BRACKET STEP #3 SHELF Operation Controls and Indicator Lamps (see Figure below) The power switch controls power to the unit. The temperature display shows the chamber temperature in degrees Celsius. The heater lamp indicated when the heater is operating. The temperature adjust knob is used to control the chamber temperature. -
Page 6: Setting The Temperature
Setting the Temperature Use the temperature adjust knob to set the desired temperature. The knob is rotated clockwise to increase the chamber temperature and counter clockwise to decrease the chamber temperature. Operating the Incubator To turn the incubator on, switch the power switch to the on (I) position. Set the desired chamber temperature. -
Page 7: Technical Specifications
All Boekel laboratory products are designed to comply with IEC1010-1. No routine maintenance is required. There are no user serviceable parts in this product. There are no parts that are required to be examined or supplied by Boekel or our agent. -
Page 8: Warranty
Boekel warrants this product to be free of defective material and workmanship for a period of two years from the date of manufacture. The liability of Boekel for any defective equipment during the warranty period shall be limited to the repair of such equipment or replacement thereof without charge for parts or labor.
Need help?
Do you have a question about the 133000 and is the answer not in the manual?
Questions and answers