Advertisement
Model Composition
VL-SWD501AZ
VL-SWD501UAZ
Specifications
VL-MWD501BX
Model number and name
Main Monitor Station (Main monitor)
Dimensions
180 mm
Power supply unit (VL-PS241)
Power source
24 V DC, 0.5 A
Standby: Approx. 1.4 W
Power consumption
During operation: Approx. 10 W
Dimensions (H x W x D)
180 x 165 x 21 mm
(Excluding protruding sections)
Weight
0 °C to 40 °C, Up to 90 % RH
Operating environment
(Relative Humidity) non condensing
Display
Approx. 5 inch, wide colour display
Frequency
1.88 GHz to 1.90 GHz
Rated load: 24 V AC/DC, 0.3 A or lower
Option output (A contact)
Minimum applicable load: 5 V DC, 0.001 A
(Output when there is a call from the doorphone)
Viewing angle
Installation method
(mounting bracket supplied)
IP rating / IK rating
External material
Flame retardant ABS and PS resin
VL-WD812AZ
Model number and name
Wireless Sensor Camera
Up to 4
118 mm
Dimensions
160 mm
Power supply unit (VL-PS241)
Power source
24 V DC, 0.4 A
During standby: Approx. 1.5 W
During operation: Approx. 4.5 W (when
Power consumption
the LED lights are not lit), Approx. 8 W
(when the LED lights are lit)
160 x 118 x 290 mm
Dimensions (H x W x D)
(when the camera is front facing and
including the wall mount bracket)
Weight
-20 °C to 50 °C,
Operating environment
Up to 90 % RH (Relative Humidity)
non condensing
Frequency
1.88 GHz to 1.90 GHz
Installation method
(wall mount bracket supplied)
Approx. 100 m (line-of-sight distance
Transmitting range
from the main monitor)
Minimum illuminance required
Image sensor
0.3 M pixel CMOS
Lighting method
2 white LED lights*
Angular field of view
Horizontal: Approx. 53°
(camera angle)
Vertical: Approx. 41°
• Heat sensor (when the surrounding
temperature is approx. 20°)
Horizontal: Approx. 63°, vertical: Approx.
Sensor detection range
20°, detection range: Approx. 5 m
• Motion detection sensor Horizontal:
Approx. 53°, vertical: Approx. 41°
Pyroelectric infrared sensor
Sensor detection method
(heat sensor) and motion detection
IP rating
Horizontal: ±90°, vertical: facing forward
Adjustable mounting angles
- facing down approx. 60°
(adjustable when mounting)
Heat sensor adjustable angles
Manually adjustable to 2 angles
External material
PC+ABS resin
*1 The minimum illuminance required when the camera's [Brightness] setting is set to [+3].
*2 Approx. 8.5 lx when 3 m in front of the camera, and approx. 4 lx when 3 m away and 20° to the left or right of the camera.
*3 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation Guide, and
appropriate water protection measures are taken. Do not install the camera in areas directly exposed to water or rain.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
VL-V554BX (Surface mount)
VL-V554UBX (Flush mount)
Door Station (Doorphone)
Up to 2
21 mm
165 mm
118 mm
169 mm
Power supplied by the main monitor
20 V DC, 0.23 A
-
VL-V554BX: 169 x 118 x 30 mm
VL-V554UBX: 169 x 118 x 16.5 mm
(excluding sections embedded into the wall)
470 g
VL-V554BX: 405 g, VL-V554UBX: 345 g
-10 °C to 50 °C, Up to 90 % RH
(Relative Humidity) non condensing
-
-
-
Horizontally: Approx. 170°
-
Vertically: Approx. 115°
VL-V554BX: surface mount
Wall mount
(mounting base supplied)
VL-V554UBX: flush mount
(flush mounting box supplied)
3
-
IP54*
/ Compliant with IK07
Aluminium and flame retardant PC+PS resin
VL-FKD2AZ
DECT Repeater
Up to 2
290 mm
111 mm
82 mm
142 mm
94 mm
AC adaptor (PQLV219AL)
Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 6.5 V DC, 0.5 A
During standby: Approx. 1.5 W
During operation: Approx. 2.3 W
(when transmitting)
82 x 111 x 39 mm
960 g
88 g (excluding the AC adaptor)
0 °C to 40 °C
Up to 90 % RH (Relative Humidity)
non condensing
1.88 GHz to 1.90 GHz
Wall mount
-
Approx. 100 m (line-of-sight distance
from the main monitor)
1 lx*
1
-
-
2
-
-
-
-
3
IP54*
-
-
-
PS resin
VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554BX x 1
VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554UBX x 1
VL-WD613BX
Wireless Monitor Station (Sub monitor)
Main body
Up to 6
35.8 mm
52 mm 30 mm
30 mm
173 mm
16.5 mm
Rechargeable Ni-MH (AAA x 2)
-
173 x 52 x 30 mm
160 g (including the batteries)
0 °C to 40 °C, Up to 90 % RH
(Relative Humidity) non condensing
Approx. 2.2 inch, colour display
1.88 GHz to 1.90 GHz
-
-
-
-
ABS resin
Installing the Main Monitor
Attach the mounting bracket to the wall securely.
Install the mounting bracket on a vertical flat wall.
Mounting bracket
39 mm
Screws
Installing the Doorphone
• VL-V554BX (Surface mount)
Screw × 2
Mounting base
(accessory)
Install the mounting base on a vertical flat wall.
• VL-V554UBX (Flush mount)
Flush mounting box
(accessory)
Installing the Wireless Camera
Mounting screws
(locally procured) × 4
DC cable
Charger
104 mm
81 mm
76 mm
43 mm
AC adaptor (PNLV226AL)
Input: 220-240 V AC, 0.2 A, 50/60 Hz
Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 5.5 V DC, 0.5 A
Standby: Approx. 0.4 W (when the sub
monitor is not placed in the charger)
During charging: Approx. 1.4 W
43 x 81 x 76 mm
70 g (excluding the AC adaptor)
0 °C to 40 °C, Up to 90 % RH
(Relative Humidity) non condensing
(Relative Humidity) non condensing
-
-
-
-
-
-
ABS resin
Vertical, flat wall
Hole in wall
60 mm
83.5 mm
7 mm
50 mm
83.5 mm
Wall
Wire (locally procured)
100 mm
151 mm
37 mm
46 mm
Screws (accessory)
83.5 mm
Cable access hole
• The actual product may vary slightly from photograph.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
MG-DHPL003EN 1410ITP/ZZZ-AZ1
VL-PS241
Power Supply Unit (part)
100 mm
*Indoor use only.
Output: 24 V DC, 0.6 A
-
104 × 100 × 54 mm
215 g
0 °C to 40 °C, Up to 90 % RH
-
-
-
-
-
-
Flame retardant PC+ABS resin
Advertisement
