Making An Outgoing Call - Audiovox NVX430 User Manual

Notes: 1. When pairing, please make sure the distance between the

7.2 Making an Outgoing Call

Tap to open the Phone keypad:
Tap the "0,1~9,* #" icon to input the phone number; then tap
dialing. When dialing, the following screen will be displayed:
In the talk mode, the following screen will be displayed:
82
device and the mobile phone is within the pairing range.
2. After successful pairing, tapping
3. After successful pairing, if the Sleep/Wake up Button is
pressec to turn off the device, when the device is turned on
again, the device will connect to the mobile phone
automatically. You can confirm the connection on your mobile
phone.
4. After successful pairing, If the BATTERY is switched to the
OFFposition to turn the device off, when you turn on the
device again, the device will not connect to the mobile phone
automatically; you must tap
phone. (No pin code input on your phone is required.)
5. When the device indicates a low voltage condition, the pairing
may fail.
will go unanswered.
to connect the mobile
to confirm t he