Firmware Update; Bootloader V2.0; Warning; Procedure - DELTACAST DELTA-neo N2H User Manual

10 FIRMWARE UPDATE

Since the release 2.0 of the DELTA-neo N2H, there exist two kinds of upgrade:

Bootloader upgrade. Bootloader v2.0 is required to be able to install firmware 2.0 or higher;

Firmware upgrade that migrates any version 1.X to 1.Y and any version 2.X to 2.Y.

10.1 BOOTLOADER V2.0

10.1.1 WARNING


The bootloader 2.0 can be installed from the firmware v1.5.0 only. The bootloader upgrade operation
set DELTA-neo N2H system state in

The failsafe mode enables the installation of a firmware 2.Y.

10.1.2 PROCEDURE

In the ADMIN web
"n2h_upgrade_archive_v1.x_to_bootloader-2.0-*.tar.gz" and send it to the DELTA-neo N2H by
clicking the Update button.
Once this file is loaded, the upgrade process runs for a long time (this kind of upgrade can take about 30 minutes).
An "Update in progress" splash screen is displayed during this operation. Don't shut down the box during
this process.
DELTA-neo N2H User Manual
Failsafe mode (ready for firmware 2.Y upgrade);
page, the user can

Figure 21 ADMIN webpage: Upgrade to Bootloader v2

select an update archive named
Page 25