Advertisement
Available languages
Available languages
MAGNETIC KEY READER 8 BITS
TECHNICAL FEATURES:
MAGENTIC READER TRINARY
Power supply
Dimensions (mm)
Power Consumption
(Stand by)
Power Consumption
(In use)
Reader max./Decoder
Material
Channels
MAGNETIC KEY TRINARY (8 MAGNETS)
Numero de combinaciones
Sistema de codificación
INSTALLATION:
It is important not to power on the "reader" before making the connec-
tions.
-
Pull out the front of the "Magnetic Lock" by pressing with small
screwdriver on the two holes in the bottom of the main box. With
this you can then unlock the two tabs on the front where is the
circuit, pull it out and connecting. Previously you have to pass the
cable through the corresponding hole of the main box.
-
The connection of the magnetic reader to the decoder is performed
by means of the inclined terminals of the two components where
"+" and "-" is the power to 12Vdc provided by the decoder, and "S"
and "C" are the data signals.
-
Once connected, close the magnetic reader.
For connecting use flexible cable 4x1mm.
To facilitate installation on different surfaces, we have been provided
extra equipment like:
-
recessed box (on the wall)
-
for surface box
-
metal column.
OPERATION:
Place the magnetic key on the pre-formed relief of the structure.
The upper two color led will flash (red) to indicate the correct positio-
ning.
If the transmitted code correspond with that of the decoder, the relay
will activate and the led will flash (green).
If it does not work:
-
Check the decoder supply voltage
-
Check the continuity of the cable that connects the reader with the
decoder
-
Check that the key coding is identical to that
of the decoder
-
Ground the metal reader
KEY ENCRYPTION:
-
Extract
the
magnet
ted in the lower part of the key using
a screwdriver, by turning through 90° to un-
lock it. Afterwards you can pull it out with your
fingers.
-
The magnet holder has 10 niches identified
from number 1 to 8, "C" and "I".
The numbers from 1 to 8 place the magnets that are used to dial
the "trinary" code that will coincide with the micro-switches of the
decoder.
The niche identified as "C" must be left without magnet.
The magnet placed on "I" position must always be positioned, sin-
ce
without the magnetic reader can not work.
By default, the magnet keys have all the magnets positioned with
the visible black side.
To change the magnets position insert a small screwdriver on the cen-
tral slots and then turn its
2
English
12Vdc Decoder
75x75x62
20 mA
120 mA
4
Zamak or plastic
1 (2,3 hierarchical readers)
6.561
Imanes
+
-
S C
holder
loca-
DECODER-KEY MATCHING
CODE SELECTION
KEY (MAGNETS 1-8)
WITHOUT MAGNET
MAGNET (BLACK SIDE)
MAGNET (WHITE SIDE)
CHANNEL SELECTION
DECODER (SELEC-
KEY (MAGNET "C")
TION BRIDGE 1-2-3)
WITHOUT MAGNET
MAGNET (BLACK
SIDE)
MAGNET (WHITE SIDE)
DECODER
(MICROINT.1-8)
+
0
-
MAGNETIC REA-
DER
NORMAL/HIE-
1° CH
RARCHICAL
2° CH
HIERARCHICAL
3° CH
HIERARCHICAL
Advertisement
