Advertisement
Advertisement
Related Manuals for Living & Co YF-ST1638
Summary of Contents for Living & Co YF-ST1638
- Page 1 40cm Pedestal Fan INSTR CTION MANUAL YF-ST1638...
-
Page 3: Table Of Contents
Contents Page Important Safety Instructions Product Overview Getting Started Instructions Other Useful Information 1300 886 649 1300 886 649... -
Page 4: Important Safety Instructions
Important Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire,electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. - Page 5 Important Safety Instructions (Cont.) RCD: Unless your home is already fitted with a residual current device (safety ・ switch), we recommend installing an RCD with a rated residual operating current not exceeding 30mA to provide additional safety protection when using electrical appliances. See your electrician for professional advice. Usage conditions and restrictions ・...
-
Page 6: Product Overview
Product Overview Part identification list Rear grille Front grille Grille nut Blade cap Blade Motor Safe screw Body Control panel Safe Power cord Height Adjustment Control Collar Remote control Outer Pipe Base Lock plate L-shaped screw NOTE: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased. -
Page 7: Getting Started
Getting Started Before first use • Unpacking: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. - Page 8 Getting Started (Cont.) WARNING: Electric shock hazard! Do not connect the fan to power until it is fully assembled. ASSEMBLY INSTRUCTIONS: 1. Unscrew the Height Adjustment Control Collar from the Outer Pipe by turning counter-clockwise and set aside. Pull out the Inner Pipe all the way to the top.
- Page 9 Figure 1 Figure 2 Height Adjustment Control Collar Outer Pipe Lock plate L-shaped screw Figure 3 Blade cap Figure 4 Grill nut Grill nut 1300 886 649...
- Page 10 Figure 5 Figure 6 Guard centre cap Blade cap Figure 7 1300 886 649...
-
Page 11: Instructions
Instructions Using the fan Decide on a location for the fan: convenient to a mains electrical supply socket. ・ Place the fan on a dry, level surface floor where it will not overturn during use. If moving the fan to a different location, switch off and unplug it from the mains. Make sure the fan is switched to the OFF position, then insert the power plug into an appropriate electrical outlet and switch on power to the outlet. - Page 12 Oscillation (Fig.1& Fig.2a) ・ Press the OSC button (on the remote control or on the control panel) to activate the oscillation function for widespread breeze distribution. ・ Press the button again to stop oscillation when the fan head is in the desired position.
- Page 13 Battery replacement If the battery in the remote control is flat, a new CR2025 (or equivalent) battery needs to be inserted. Follow the instructions below, as illustrated. screw • Remove the retaining screw using a small cross head screw driver. •...
-
Page 14: Other Useful Information
Other Useful Information WARNING! ・ Before cleaning, maintenance or moving the fan, and before removing a front or rear grille, switch off the fan and unplug it from the wall outlet. ・ Do not immerse the fan in water or other liquids. Do not spray it with liquids. - Page 15 Other Useful Information (Cont.) echnical specifications Power 55W, 220-240V AC, 50Hz Fan speeds 3 (Low - Medium - High) Dimensions (mm) 1250 (H) x 430 (L) x 400(D) Weight approx. 4.93 kg Compliance This appliance has been fully tested and meets all requirements as set out by standards AS/NZS 60335.1 and AS/NZS 60335.2.80.
- Page 16 1300 886 649 1300 886 649...