Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Reechcraft Bronco
Summary of Contents for Reechcraft Bronco
- Page 1 ™ OPERATOR’S SAFETY MANUAL 4023034...
-
Page 2: Foreword
The purpose of this manual is to provide safe and proper operating procedures for anyone utilizing the benefits of this all-terrain scaffold. Because we at ReechCraft, Inc. are always working to improve our products, processes and procedures, we reserve the right to make changes without prior notice. -
Page 3: Contact
REPRESENTATIVE FOR INFORMATION REGARDING SAFETY RELATED BULLETINS WHICH MAY HAVE BEEN ISSUED FOR THIS PRODUCT. REECHCRAFT MUST BE NOTIFIED IMMEDIATELY IN ALL INSTANCES WHERE OUR PRODUCTS HAVE BEEN INVOLVED IN AN ACCIDENT INVOLVING BODILY INJURY OR DEATH OF PERSONNEL OR WHERE SUBSTANTIAL PERSONAL PROPERTY DAMAGE OR DAMAGE TO THE REECHCRAFT PRODUCT HAS OCCURRED. -
Page 4: Table Of Contents
Function Check Items ..............14 SECTION - 3 - ALL-TERRAIN SCAFFOLD OPERATION ....... 15 3.1 GENERAL ....................15 3.2 ALL-TERRAIN SCAFFOLD DESCRIPTION ..........15 3.3 ALL-TERRAIN SCAFFOLD SET-UP ............16 Getting Started ................16 3.4 WEIGHT DISTRIBUTION ................17 Bronco by ReechCraft... - Page 5 6.4 SERVICING & MAINTENANCE GUIDELINES ..........26 General .................... 26 Safety & Workmanship ..............27 Cleanliness ..................27 6.5 DECAL REPLACEMENT ................27 All-Terrain Scaffold Log ..............28 SECTION - 7 - WARRANTY ................30 7.1 NORTH AMERICAN END-USER LIMITED WARRANTIES......30 888-600-6160 www.reechcraft.com/bronco...
-
Page 6: Section - 1 - Safety Precautions
(PPE) for the conditions. If there are any questions regarding safety, training, maintenance, inspection, application or operation of the all-terrain scaffold, please contact ReechCraft. FAILURE TO COMPLY WITH THE SAFETY PRECAUTIONS LISTED IN THIS MANUAL COULD RESULT IN ALL-TERRAIN SCAFFOLD DAMAGE, PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. -
Page 7: Work Site Inspection
Do not operate any all-terrain scaffold on which the safety decals or instruction placards are missing or illegible. • Avoid any build up of debris on platform floor. Keep mud, oil, grease and other slippery substances from footwear and the platform floor. 888-600-6160 www.reechcraft.com/bronco... -
Page 8: Operation
• Never operate an all-terrain scaffold that is not working properly. If a malfunction occurs, contact ReechCraft. • Unless in an emergency, do not allow personnel to tamper with the all-terrain scaffold from the ground with personnel on the platform. -
Page 9: Electrocution Hazard
Over 200KV to 350KV 20 (6) Over 350KV to 500KV 25 (8) Over 500KV to 750KV 35 (11) Over 750KV to 1000KV 45 (14) NOTE: This requirement shall apply except where employer, local or governmental regulations are more stringent. 888-600-6160 www.reechcraft.com/bronco... -
Page 10: Section - 2 - Preparation & Inspection
The exercise of good judgment, safety control, and caution in evaluating each situation is the responsibility of the Operator. The Operator must stop using the all-terrain scaffold in the event of a malfunction or other unsafe condition of the all-terrain scaffold or job site. Bronco by ReechCraft... -
Page 11: Preparation, Inspection & Maintenance
5. Walk-Around Inspection - Refer to Section 2.3. 6. Function Check - Once the Walk-Around Inspection is complete, perform a function check of all systems in an area free of all over-head or ground level obstructions. Refer to Section 2.4 for additional information. 888-600-6160 www.reechcraft.com/bronco... -
Page 12: Daily Walk-Around Inspection
PREPARATION & INSPECTION The following table outlines the periodic all-terrain scaffold inspection and maintenance recommended by ReechCraft. Consult local regulations for further requirements. The frequency of inspections and required maintenance must be increased if the all-terrain scaffold is exposed to harsh conditions, increased use or if the all-terrain scaffold is used in a severe manner. -
Page 13: Walk-Around Inspection Components
(See Figure 2-2) 3. Rubber Feet - Check for cracks or tears. (See Figure 2-2) 4. Hinge Mount - Check all four hinge mount brackets to ensure they are straight. (See Figure 2-2) Figure 2-2 - Inspection Points 888-600-6160 www.reechcraft.com/bronco... -
Page 14: Function Check
3. Rubber Feet - Check for cracks or tears. (See Figure 2-3) 4. TwistLok™ - Check for proper function and that locking pins can fully engage the frame clearance holes. (See Figure 2-3) Figure 2-3 - Function Check Items Bronco by ReechCraft... -
Page 15: Section - 3 - All-Terrain Scaffold Operation
The ReechCraft Bronco is an all-terrain scaffold. The removable platform is mounted to a set of Broncos. The all-terrain scaffold is stabilized by way of adjustable legs and locking pins. The Bronco’s intended purpose is to provide personnel and their tools access to work areas above the ground. -
Page 16: All-Terrain Scaffold Set-Up
NOTE: For the purposes of this section, it is assumed that the all-terrain scaffold is in it’s fully stowed configuration. Getting Started 1. Unfold the Bronco by pulling out the rear leg and pressing down on the spreader to lock the leg into position. -
Page 17: Weight Distribution
Note the decal on the back leg and ensure that the horizontal line is parallel to the ground and the vertical line is plumb (See Figure 3-2). NOTE: This label is located on the side of the middle leg of the Bronco and must be followed to ensure proper set-up! Figure 3-2 Caution Label 3.5 Platform Configuration... -
Page 18: Section - 4 - Emergency Procedures
Fargo, ND 58102 Toll Free: 888-600-6160 E-mail: customer.service@reechcraft.com Failure to notify the manufacturer of an incident involving a ReechCraft Bronco product within 48 hours of such an occurrence may void any warranty consideration on that particular all-terrain scaffold. FOLLOWING ANY ACCIDENT, THOROUGHLY INSPECT THE ALL-TERRAIN SCAFFOLD AND TEST ALL FUNCTIONS. -
Page 19: Section - 5 - General Specifications
This section of the manual provides operating specifications and information necessary for the proper maintenance of this all-terrain scaffold. 5.2 Decal Contents & Location ALL-TERRAIN SCAFFOLD Type ReechCraft Part Number Brand & Caution Not A Step 4027468 Proper Bronco Set-Up 4027470 Brand 4027469 Warning 4027467 User Manual 4023034 888-600-6160 www.reechcraft.com/bronco... -
Page 20: All-Terrain Scaffold Specifications
*Based on 4 in. platform height plus 6 ft. **Based on a 4 in. platform height. ***Engineered Aluminum 32 ft platforms can weigh approximately 250 lbs. At 600 lbs per pair total Bronco payload capacity, that leaves 350 lbs for user, tools and materials. - Page 21 GENERAL SPECIFICATIONS Fully Retracted Bronco - Top Down View Fully Retracted Bronco Fully Extended Bronco 888-600-6160 www.reechcraft.com/bronco...
-
Page 22: Section - 6 - Service & Maintenance
It is important that maintenance personnel heed these warnings to avoid possible injury to themselves or others. Due to our commitment to continuous improvement, ReechCraft reserves the right to make specification changes without prior notification. Contact ReechCraft for updated information. -
Page 23: Maintenance Safety
OBSERVE, UNDERSTAND AND OBEY ALL DANGER, WARNING, CAUTION AND OTHER INSTRUCTIONS ON THE ALL-TERRAIN SCAFFOLD AND IN OPERATORS MANUAL. • KEEP STANDING SURFACES AND HAND HOLDS FREE OF GREASE, WATER, OIL, ETC. • USE ONLY APPROVED, NONFLAMMABLE CLEANING SOLVENTS. 888-600-6160 www.reechcraft.com/bronco... -
Page 24: Preparation, Inspection & Maintenance
Preparation, Inspection & Maintenance Table 2-1 outlines the periodic all-terrain scaffold inspection and maintenance recommended by ReechCraft. Consult your local, regional or national regulations for further requirements. NOTE: The frequency of inspections must increase as environment and frequency of use requires. -
Page 25: Annual All-Terrain Scaffold Inspection
5. Check area is clean and free of debris 6. Check for proper adjustment 7. Check for proper operation 8. Check for proper tolerances 9. Check for proper specifications 10. Verify 11. Perform 12. Replace 13. Inspect per Operator’s Safety Manual 888-600-6160 www.reechcraft.com/bronco... -
Page 26: Servicing & Maintenance Guidelines
WHEN AN ABNORMAL CONDITION IS NOTED AND PROCEDURES CONTAINED WITHIN THIS MANUAL DO NOT SPECIFICALLY RELATE TO THE NOTED IRREGULARITY, USE OF THE ALL-TERRAIN SCAFFOLD SHOULD BE STOPPED AND A QUALIFIED MECHANIC WITH PROPER KNOWLEDGE SHOULD CORRECT THE IRREGULARITY BEFORE WORK IS RESUMED. Bronco by ReechCraft... -
Page 27: Safety & Workmanship
All decals must be mounted to the all-terrain scaffold as specified and clearly legible. Please see Figure 5-1 to Figure 5-4 and refer to table 5-1 for positions and ReechCraft part numbers. To replace a damaged decal, first remove it completely without damaging the underlying surface. -
Page 28: All-Terrain Scaffold Log
SERVICE & MAINTENANCE ALL-TERRAIN SCAFFOLD LOG Record Type: 1) Examination 2) Test 3) Major Alteration 4) Repair Information Date Record Notes Type Bronco by ReechCraft... - Page 29 NOTES 888-600-6160 www.reechcraft.com/bronco...
-
Page 30: Section - 7 - Warranty
Product, at the sole option of ReechCraft. Such replacement parts shall be provided at no cost to the End-User. Replacement parts and components provided under this End-User Warranty will continue to be covered until the end of the Warranty Period. - Page 31 Parts purchased or sourced by suppliers other than ReechCraft or a ReechCraft Reseller are not covered under this End-User Warranty. Under no circumstances will ReechCraft be responsible for any expense in...
- Page 32 ™ ReechCraft Inc. 845 34th St N Fargo, ND 58102 888-600-6160 www.reechcraft.com/bronco...
Need help?
Do you have a question about the Bronco and is the answer not in the manual?
Questions and answers