Subscribe to Our Youtube Channel
Summary of Contents for Tvone 1RK-SPDR-PWR
- Page 1 ® We Engineer Confidence ® 1RK-SPDR-PWR ONErack Spider Power Module User Guide MNL-1RK-SPDR-PWR-V1.00...
- Page 3 The box should include: - 1x Power Module 2x Green 2-pin module power connectors This User Guide Safety, Compliance & Warranty Statement In the unlikely event that a component is missing or damaged, please contact tech.usa@tvone.com or tech.europe@tvone.com. MNL-1RK-SDPR-PWR-V1.00...
- Page 4 Insert the new Module into the ONErack Spider PSU and tighten screw. Using one of the Voltage stickers (received with your original unit), apply to the end of the screw that holds the Power Module in place. tvONE...
- Page 5 Remove your device’s power lead from the mains supply before you cut the cable. Cutting power leads should only be done by competent, qualified personnel – if in doubt, consult a qualified electrician. MNL-1RK-SPDR-PWR-V1.0...
- Page 6 2 loads together exceed 35W then you will need to use separate Modules. Risk of damage to equipment Each Power Module can only supply 35W Max. If your DC load exceeds this, you CANNOT power it with ONErack Spider Power Module. tvONE...
- Page 7 Copyright © 2021 tvONE™. All rights reserved.
Need help?
Do you have a question about the 1RK-SPDR-PWR and is the answer not in the manual?
Questions and answers