Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Disk Dr. NG20-M
- Page 2 1. Traction Belt 2. Air Pump 3. Extension Hose 4. Spare Air Release Screw 5. User Manual 6. Laundry Bag 7. Chin Collar Neck Support 100% Cotton Lining Belt Adhesive Side Support Frame Extension Hese Air Release Screw Support Adhesive Side Air Injection Nozzle Air Injection Tongs (Picture 1)
- Page 3 1. Ensure that the Traction Belt is completely deflated. If there should be some air left, remove air by rotating the Air Release Screw counterclockwise. Then rotate the Air Release Screw clockwise before air injection. 2. Attach the one face of the Belt Adhesive Side to the one face of the Support Adhesive Side. (Air Injection Nozzle should face down) 3.
- Page 4 1. When not in use, do keep the Traction Belt deflated as soon as possible. 2. Do not apply excessive force to Air deflation Screw as it can be tight when rotated slightly clockwise. If you rotate it excessively, it may be damaged. 3.
-
Page 5: Safety Features
SAFETY FEATURES The traction can be released easily and immediately by rotating the Air Release Screw slightly counterclockwise or depressing the pin in the center of the Air Release Screw if necessary. USEFUL TIPS 1. Recommended wearing time. (1) Wear the Traction Belt then inject air with the appropriate pressure for 30 minutes to 1 hour. Care should be taken not to move the neck during this treatment session. -
Page 6: Intended Use
INTENDED USE -Herniated, Bulging discs -Degenerative cervical discs -Radiculopathy(nerve pain) in arms -Cervical pain of physical origin which need traction therapy CONTRAINDICATIONS -High blood pressure -Cerebrovascular disease -Tumor, all inflammatory disease of vertebrae -Severe cervical spine instability -Severe osteoporosis -Post spine operation prior to the 3rd month. -Cases avoiding the use of traction therapy under the prescription of a licensed practitioner. - Page 7 2. Hand Wash [Traction Belt] 1) Ensure that the Air Release Screw of Air Injection Nozzle is tight so as that water may not penetrate into it. 2) Inject air into the Traction Belt up to about half of full pressure. 2) Use merely a soft sponge and do not rub the Traction Belt with your hands.
- Page 8 ・Patent number for an invention in USA : 5980560・ ・International Application No. PCT/KR00/00368・ ・FDA ER No. 9611754 and Device Listing No. B 115761 in USA・ ・Other international patents pending・ All Disk Dr.s are high quality products and are manufactured to ISO9001, ISO13485 standards. Distributor : CMF-415-04-02...
Need help?
Do you have a question about the NG20-M and is the answer not in the manual?
Questions and answers